Need to remove the pass word of my tv sharp 21inch slim type

Unfortunately you damaged the panel, its not repairable as they cost more than the set did new

ok ur tv powersupply is ok but horizantal is not working chk ur fbt hot & micronass

That is what a tv does when the power supply section blows up. It needs repairs

.sharp X Flat Slim TV model number 21G-FX35 i lost my password please tell me its master password

sounds like the closed caption has been acidentally been turned on look at the remote see if there is a closed caption button if not look in the set-up menu

There are settings on most DVD players as well as TV's that allow you to adjust the type of display you want. Make sure both the DVD and TV are set to the same display type (usually either 16:9 for your type of TV). If that still does not fill the screen you will have to use the Zoom function on either your DVD or TV. This will cut off part of your movie, but should allow you to fill the screen. Most DVD movies will also allow you to choose widescreen or normal viewing from their menu. Again, you will lose a small part of either side of the movie, but at least you will fill your screen.

you have got an older model, try this:

follow the instructions:



you will need:
a slim x-screw-driver
a sharp knife with a slim blade and
a cup or else for the screws, don't loose them!
a new c-mos bios battery model: CR-1220 (exchange it while your in there!)


you find c-mos battery and hdd under the keyboard!

- turn off the power, remove accu and charger cable, for static electricity is friendly fire
to your laptop now !

- open your screen to max. fold (angle of 180 degrees)

- look for removable plastic part near to left holder of screen
- carefully remove it
- also remove plastic panel right to it in the section between display holders
metal should be visible now
- carefully! remove keyboard, starting at the left side, continuing topside
as you won't be able to fully remove it, simply turn it over
- unscrew any screws holding the metal plate, remove it
- now you see: left the CPU plus cooler, top right middle the hdd still in an adapter attached
to the mainboard, at it's lower right the C-MOS battery (g
- turn loos these screws
- carefully remove the frame/adaptor holding the hdd
- unscrew again the adaptor
- seperate hd fram adaptor

... and gotcha!

be careful to get a proper notebook hd (samsung or such)
exchange CMOS-battery by chance
reattach new hd to frame, again carefully!

to reassamble: rewind the procedures
put everything back in place

replug, pray and turn on the lappie.


wish you luck.....

looks like you have to replace the the tuner part (thats the slim silver box where the coax connector was ) if your handy with this solution and can repair it yourself , then you need to go to a SHARP authorized dealer to purchase the part or leave it there for repair . let me know if this helpful, thanks AJ

Normallly, if the picture size button on the remote for the television does not achieve the desired affect, then, a cable box or a satelite box is where the change needs to be made.
For example:
A Motorola Cable box needs to be set up to go to a wide screen or zoom when an analog signal is detected.
Some Dish Network boxes have Size buttons on their remotes and also in their main menu.
It's difficult to determine the repair without knowing the types of the peripherals.
Hope this helps.