Rca d52w14 no picture hit power button green light blinks three times but tv dont come on
Could be power supply problem or high voltage problem. check caps in main power supply first.look for caps that have tops puffed up ususlly three or four.....
Okay this really sounds stupid but we had tryed everything to fix ours and the only thing that worked was to use the blow dryer trick. If you are standing behind your tv blow dry the board on the lower right side for about a minute and it will come back on. It worked for us. Who ever thought of this tip thank you thank you thank you! Also your screen may be a lil funny but give it time it will go back to normal within less then 3-5 minutes!
2,377 views
Usually answered in minutes!
I HIT THE POWER BUTTON, THE TV ACTS AS IF ITS GOING TO POWER UP AND THEN SHUTS OFF. IT THEN TRIES TO POWER UP TWO MORE TIMES ON ITS OWN BUT WILL NOT GET PAST THE POP TO TRIGGER SCREEN ILLUMINATION. SCREEN WILL NOT ILLUMINATE.
turn power on tv green light comes on and blinks and makes a funny sound
same exact thing
Same deal here the tv makes a small high pitch sound like its about to boot then off and on three times
Same problem green light blinks 3 times must wait a few minutes then retry usually takes 3 times to start.
power light blinks several times but doesnt turn on just flashing, and keeps flashing unless i unplug power cord, what part or parts could it be and were would they be located??????
im having the same problem light just blinks but never comes on what could be the problem and what parts and were would the parts be located???? any help will be greatly appreciated
also before we lost power the conversion was off real bad and pic slightly fading but auto conversion would not do anything to help could the tubes be going out??????
tv will not come on. the light on the tv blinks green. this is a tv that is only 3 years old and will not show a picutre or anything. from the blogs that are posted, it looks like a manufacture problem .....
There are no popped caps whats next?
I have an RCA m50wh72syx12 model projection tv when I power it on I get no sound and no picture just the green light flashes several times and then remains solid green but no picture or sound still
I have an RCA m50wh72syx12 model projection tv when I power it on I get no sound and no picture just the green light flashes several times and then remains solid green but no picture or sound still
×