Oki 168 error 4 - OKI C5150n Led Printer

Hi,

I believe that this is a high-temperature error. so, you might need to move the printer to a cooler room or lower the temperature of the room that the printer is in.

Thank you.

This is the only place it is mentioned is the Service Manual and the Error codes list

https://www.manualslib.com/manual/869465/Oki-C9600.html?page=253&term=RFID&selected=5#manual

Use the Search feature for 'RFID'.

C9600/C9800/ES3640 Error Codes - OKI Support

https://my.okidata.com > idocs2.nsf
PDF
May 24, 2005 - Access failure to parameter storage location due to file damage or etc. ... An interface error was detected with the RFID reader device.
4 pages

Kthurst,Possible bad regulator code 168, did not find anything on code Is20230, links below to Polaris forum with good info.

• press the helpful button and follow me on fixya for more tips and info.
• 
  

Error Code 105 Polaris RZR Forum RZR Forums net

polaris code 520207

RZR 1000 Code chart Polaris RZR Forum RZR Forums net

what make and model printer is it?

check all sensors better yet follow this
http://www.okiservice.pt/index2.php?option=com_docman&task=doc_view&gid=607&Itemid=4

tengo una impresora oki y me muestra error fatal en la pantalla que debo hacer para quitarle ese error de mi impresora

From the service manual, doesn't look good.
A technicain will have to look at the printer.

RFID Reader I/F Error
An interface error was detected with the RFID reader device.
01 : communication error between the RFID reader and the engine PCB.
02 : the transceiver circuit error of the RFID reader.
03 : communication error between the RFID reader and the Tag chip.
04 : the RFID Tag detection error (more than 4 chips).
If rebooting the machine does not improve the symptom, you need to
check the device.

I had a paper jam and removed the jammed papers. The paper jam cleared and then the Fatal Error 980 appeared. OKI C5500 printer

Found this at Fixyourownprinter.com

1. Turn machine on while pushing and holding the TWO up/down menu buttons at same time.
2. Menu window will show "OKI USER"
3. Scroll to " Engine Dialog Mode" is indicated. Push Enter button.
4. "Diagnostic Mode xx.xx.xx S-Mode is indicated.
5. Scroll to "NV-Ram initial" is indicated. Push ENTER.
6. Window shows "NV-Ram- Initial Table 1".
7. Push ONLINE and ENTER Buttons simultaneously and HOLD for 10 seconds after you see "Executing Reset" appear in menu window.
8. Restart printer.

All toner, drum, fuser and transfer figures return to 100%.

Worked for me when I had the same error. Hope it helps.

hola
quiem puede ayudarme a desifar el error 980 de ld oki c6100
gracias