Question about Integra Audio Players & Recorders

Open Question

Static noise from integra receiver - Integra Audio Players & Recorders

Posted by Anonymous on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Static noise


Time to purchase new phones. It is not worth repairing the electronic parts that are failing.

Sep 21, 2015 | Lands Phones

2 Answers

Cracking and poping with Yamaha surround sound system


Try put a ground line from any metal of your stuff to the any metal direct to the ground. these eliminate noise of the speaker.

Jan 03, 2008 | Pioneer VSX-54TX Receiver

1 Answer

Integra 5.3 keeps turning off so TV will not go on. It flips back to standby mode after 2 seconds and screen says check signal cable or check connections. This issue started yesterday with a loud noise...


you most likely have a blown main output transistor or a shorted speaker. first get a mutimeter and set to lowest ohms setting and check for 4-8 ohms ( CHECK IMPEDENCE rating on back of speaker) at the speaker terminal of the speaker. if this checks out then you take the meter and set to DC and place the + / - terminals to the speaker connection on back of receiver then turn on the receiver . notice if you have any dc voltage at any sp terminal, if dc is present you have a blown output transistor. If you are not an electronic tech please refer your unit to a qualified service tech. I hope this helps.

Jan 16, 2014 | Integra DTM-5.3 Receiver

1 Answer

Integra DTR-5.6, no sound for am/fm tuner


reset receiver if that does not work You will have a defective processor pcb

Aug 24, 2013 | Integra DTR 5.6 Multi Media Amp

1 Answer

I have an older onkyo integra (TX-870) which pop when I change stations, then no sound. Need to turn off and begin again. Can this be fixed or should I purchase a new 2 channel sys?


Hi, It sounds like you are listening F.M. radio and the F.M. muting button is engaged ( as well it should be-otherwise you will have static between the stations ) sometimes there is almost a "THUMP" sound when you switch stations-this is caused by the receivers P.L.L. circuitry losing then locking in on stations, if you do not lower the system volume you will amost assuredly cause an overload of your final drivers, that's why it will come back on when turned off-it has reset. Turning off fm muting will get rid of the "POPPING" noise-it will however leave you with unbearable static which in turn should cause you to lower volume momentarily eliminating the need to constantly turn off the receiver. Thank for asking FixYa, I hope this helps, let me know how I did or if I can be of more assistance, good luck Prodzilla

Apr 13, 2011 | Onkyo Audio Players & Recorders

1 Answer

I can fax out but I can't receive faxes.


What happens if you dial your fax number the way you make a normal voice call? Does the fax machine pick the line up? Can you hear it making electronic noises? Do you hear any static or line noise?
Try also putting a regular phone on the fax line and attempt to make voice calls to test the lin quality. Listen for static, noise, volume issues. Report problems to your telecom company if you have trouble in voice calls.

May 06, 2009 | Office Equipment & Supplies

1 Answer

No sound from speakers from components with Integra 6.9 receiver


Turns out it had to do with one of the settings for the new Blu-Ray player.
Thanks anyway.

Jan 17, 2009 | Integra DTR-9.1 7.1 Channels Receiver

3 Answers

GALAXY 88 HIGHT STATIC IN THE RECEIVE ..


Hi,

If the antenna for the other properly operating radio is used with the radio with the noise and you are getting the static then we can assume it is the radio. If you hear signals with the static, that is, it does receive communications at the same time, there may be a problem with the noise reduction circuitry, or a defective component(s) in the receiver. Without knowing your experience I would suggest taking to a radio shop.

Oct 10, 2008 | Galaxy Radios DX- 88HL Base CB Radio

1 Answer

Heavy static noise


Sounds like interference getting in caused by your connecting cables. Suggest upgrading to higher quality ones.

Aug 31, 2008 | Sherwood RX-4103 Receiver

1 Answer

Receiver has lost audio


There are four surface mounted caps, 22uf/10v under the surround processor PCB on the main PCB.
Just replace them all.
That took care of my static problem.

Mar 17, 2008 | Panasonic SA-XR25 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Integra Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Bill DiBrino

Level 1 Expert

11 Answers

Naheed Mir

Level 2 Expert

160 Answers

Are you an Integra Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...