At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Cheapest option is to check your cables are in the right sockets on xbox and tv, a crossed cable would result in no signal. if in right sockets next would be to try different cables to check if yours are broken. borrowing would be cheapest. new cables would still be cheaper than any problem from inside the xbox.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did you link the controllers? by pushing the white button on the controller on the top right in the middle. its a very small button with little lines on it. you have to push the white button on the xbox first then push the little white one on the controller. well hope that helps. if not let me know
You need to reconnect your controller to your xbox. Next to the two memory slots on the front of your xbox, there should be a small round button. Turn on both your controller and your xbox. Push the little round button. There should be a similar button on your controller. Push that too. They should recognize each other.
There is a small button on the console. First, turn on the console and controller. Next push the button on the console - it's a small round button on the front between the power button and the memory chip slots. Next, push the tiny button on the controller between the left & right finger triggers. The 2 must find each other. This will send a bouncing signel to each other. After that, go through the setup screens and set your defaults for having fun.
idk bout the blue screen. but my console would say the same thing bout put in 360 to play and it wuz cuz the disk was dug in a lil bit so it wouldnt read.
u can give the tray a little push and see if it moves in, i know someone else who had the same problem, if you cant play games the laser reader may have died on you
Did you try using a cd lens cleaner in the XBox 360 dvd drive? Check the cds that they are not scratched, and you could have your son try the discs in another XBox 360.
×