Can I disassemble my Mitsubishi WS-65315 TV (65" Projection) to transport it?

http://www.tvrepairkits.com/xcart/ws-65315/

I would take a good look to make sure it got back together correctly, set does have a hidden adjustment menu once entered the Mitsubishi remote can adjust a lot of things including centering etc, want to be careful in that menu,,,confirm the model and I will give you the four digit enter code for the set.

if the reds and blues look 3d etc it is a convergence problem. see attached photos of a typical convergence problem.

here it is :

http://www.mitsubishi-tv.com/pdf/ownersguides/WS-55315.pdf

SD TECH

replace bulb and clean dust out of all cooling fans, may require you take back off set and remove and disassemble projector inside.

Good Day,
To disassemble this TV follow these directions:
1). Pull front speaker grill off
2). Unplug the 2 cables connectors in front
3). Remove 4 screws on both sides of cabinet (might have plastic covers)
4). Carefully lift cabinet top until the support tabs clear the bottom cabinet
5). Carefully rotate the cabinet top and place back side on floor ( the mirror is on the top side)
6). Pack/wrap properly with blankets and transport in this manner.

Good Luck and Move, Big Irish.

www.free-service-manuals.com

I'm not sure if this is the initial price but it was $2199.99 at Best Buy when I purchased mine on 10/01/04. Hope this helps! -D

I think This Company can help you to get new screen for your Mitsubishi TV.

Go HERE to find the parts you need.