I have a problem in ekg bionet cardiocare 2000. When I test it, the led of ready does not turn and therefore there is no signal measure. I changed the entire cable and the problem continues. Thanks

Question edited for clarity and typo.
Question moved from Cars and Trucks category.

Too specialised for Fixya. This is professional medical equipment. Contact maker support or send to them for repair. No one reports a fix for that error message.

https://www.google.com/search?q=cardiocare+2000+data+error+please+turn+off

CardioCare 2000 - Interpretive 12 Channel ...

Bionet America
https://bionetus.com > Medical > ECGs/Spirometers

The CardioCare 2000 is an economically priced interpretive 12 channel electrocardiogram (ECG/EKG) machine that does not compromise on performance.

CardioCare 2000 - Interpretive 12 Channel ...

Bionet America
https://shop.bionetus.com > products > cardiocare-2000...

CardioCare 2000 is an economically priced interpretive 12 channel electrocardiogram (ECG / EKG) machine that does not compromise on performance.
US$995.00

..

If your Bionet CardioCare 2000 ECG machine is indicating that the paper is empty even though the paper roll is correctly loaded, there could be a few reasons for this issue:

1. Paper Jam: Even though you've loaded the paper roll, there might be a paper jam inside the machine that is preventing the paper from feeding properly. Check if there's any paper stuck or misaligned within the paper path.
2. Paper Not Loaded Correctly: Ensure that the paper roll is properly loaded and inserted into the machine according to the manufacturer's instructions. Sometimes, improper loading can cause the machine to not detect the paper correctly.
3. Paper Sensor Issue: The machine has sensors that detect the presence of paper. There might be a malfunction with the paper sensor, causing it to inaccurately detect the absence of paper. Dust or debris could be affecting the sensor's operation.
4. Paper Roll Compatibility: Ensure that you're using the correct type and size of paper roll that is compatible with the Bionet CardioCare 2000. Using the wrong paper could lead to detection issues.
5. Sensor Calibration: There might be a need to recalibrate or reset the paper sensor if it's misaligned or malfunctioning. This would likely require referring to the user manual or contacting the manufacturer's support for guidance.
6. Machine Error: There could be an error or malfunction within the machine's internal components that is causing it to incorrectly display the "paper empty" message.

In any case, I recommend the following steps to troubleshoot and resolve the issue:

1. Carefully review the user manual to ensure that you've loaded the paper correctly and followed all the steps accurately.
2. Check for any visible paper jams or misalignments within the paper path.
3. If possible, power cycle the machine by turning it off, waiting for a minute, and then turning it back on. Sometimes, a simple reboot can resolve minor issues.
4. Clean the paper sensor area and the paper path to ensure there's no dust or debris affecting the sensor's operation.
5. If none of the above steps work, consider contacting Bionet's customer support or a qualified service technician for further assistance. They should be able to guide you through troubleshooting or provide professional help to resolve the issue.

Please note that specific instructions could vary based on the model and its specific design, so referring to the user manual and manufacturer's support is essential for accurate troubleshooting.

The cable may be broken inside its insulation. Or... there may be a problem with your skin on that limb - try the other arm, or use your legs.

hi, if i want to start running unit. after that always on display data error, plz turn off. why? what can i do for that? thax

The noise is because of the mechanics of the printer you have to open it and you will find one dashly is partially broken or not fixed so change it or fix it.

We are experts in fixing the Bionet 2000 ekg machines.

1) Is the machine plugged in to the wall when you are getting interference? If so, unplug it
2) Your patient cables may be malfunctioning, do they look damaged?
3) Are the electrodes expired?
4) make sure and prep the patient

If you are still having issues, send the machine to us at Discount Cardiology. We will look at it for free and let you know what is wrong with it. You then would have the option of fixing the machine or having it sent back to you.

Discount Cardiology
www.cardiologyforless.com

hi,
You have to check the patient cable of your machine . If any one of it lead is oppen then it will indicate open signal.
ok

hi,
ur machines patient cable have some problem in its left leg lead ,it may be broken inside. no ecg will come if any of the lead have problem. machine sences all the leads is it proper or not , then only it will process th ecg and give printout. u have to replace the patient cable of ur machine. or try to replace the left leg lead if it is repairable one type patient cable.
ok

Bionet CardioCare 2000 Interpretive EKG for around $1200 is a good user friendly model...

below is a link to shop for new & used machines
http://www.cardiacdirect.com/index.php?page=products&id=1

I hope this is helpful.

EKGs provide useful data and can help detect various problems related to heart function. One basic determination that can be made with an EKG is the heart rate, which can be determined by measuring the distance between peaks. Diagnosis of certain medical problems is also possible. For example, in patients with high blood pressure, the amplitude of the QRS complex is significantly increased. The balance of certain chemicals in the body can also be detected by an EKG, since the amplitude of the signals is related to the levels of chemicals in the body. Damage in the heart can also be observed by a deformation in the Q wave. The most useful characteristic of the EKG is its ability to detect and describe arrhythmias, or abnormal heartbeats. EKG machines known as Holter monitors are for these detections. Finally, EKGs can be used to observe obstructions in the arteries. This is typically done by looking for a depressed segment between the S and T waves.