Question about Radio Communications
Where do i find the uniden bearcat scanner codes, and how do i program it?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
HI again, the 248 is only a 50 channel, do you need this info for the 860? If so, I answered in your other post, but here it is again.
Hi tina33, I have an 860 scanner,and this is how I do it. If there is no freq's in there yet, start on channel 1 and punch in the freq- hit E and it will enter it into the first channel. Hit manual to go to ch 2 and repeat. If you need freq's for your area, go here and search out your state and county and it'll give you a list of freq's for your county.You do not have to add the weather channels as their in there already, just hit the weather button. I use an external antenna on mine as it extends the range and allows me to pick up the cars as well.
If you need a book for your scanner, you can get one here, just print it out.
Hope this helps,, Mechanic
Posted on Jan 23, 2008
here is a few sites that can head you in the right direction.www.radio reference.com,www.scannermaster.com,www.bearcat1.com.hope these help
Posted on Dec 04, 2008
SOURCE: lost book to scanner its
do you have a button marked "prgm"
if not, then push the manual button until it
gets to the channel you want to program,
then enter the freq ie... 155.xxx and hit
enter, don't forget the decimal point .
heres a link to uniden bearcat manuals , but i don't see yours .
but my instructions will get the job done .
Posted on Jan 13, 2009
I can't locate information specific to the 210XW, but hopefully this generic Bearcat programming info will help:
1. Press the MANUAL key to advance to the channel that you wish to reprogram.
2. Enter the new frequency, including decimal point.
3. Press the ENTER or E key.
4. Start over with step one to continue programming channels.
Posted on Aug 16, 2009
Tips for a great answer:
Jan 14, 2016 | Uniden Radio Communications
Feb 11, 2011 | Uniden BC340CRS Base Scanner
Oct 18, 2009 | Uniden BC350C Base Scanner
Aug 24, 2009 | Office Equipment & Supplies
Apr 25, 2009 | Uniden BC350C Base Scanner
Jan 13, 2009 | Radio Communications
Aug 09, 2008 | Uniden BC60XLT-1 Handheld Scanner
May 31, 2008 | Health & Beauty
280 people viewed this question
Usually answered in minutes!