Jet 3 ultra serial number - Jet 3 Ultra Power Chair

Question edited for clarity.

You have a dead short somewhere. You need some electrical knowledge and a digital multimeter for testing. Take all the covers off. Look for wiring that has rubbed through and touching or melted. Disconnect one of the motors and replace the fuse. If it still blows, reconnect that one and disconnect the other motor. If one motor doesn't blow and the other does, you know you have a faulty motor. If neither stop the issue, then you move up to the controller and look up there. With a meter you can check for shorts within the motors, as well as grounds.

Or just take it to a Service Centre and have it repaired and serviced properly.

Basic troubleshooting

INFINFB2045 Jet 3 Ultra Troubleshooting

Pride Mobility https://www.pridemobility.com > pdf > infinfb2... PDF troubleshooting instructions for the Jet 3 Ultra Power Chair. This information is to be ... A blown charger fuse can cause the charger inhibit to activate.

• 
  

  JET 3 ULTRA

  https://www.pridemobility.com > pdf > us_jazzy
  PDF
  Jet 3 Ultra www.pridemobility.com. 3 ... If the circuit trips, allow your power chair to "rest" for approximately one minute. ... thermal fuse on each lead.

INFINFB2045 Jet 3 Ultra Troubleshooting
https://www.pridemobility.com/.../troubleshooting/infinfb2045_jet_3_ultra_ troubleshooting.pdf
File Format: PDF/Adobe Acrobat
troubleshooting instructions for the Jet 3 Ultra Power Chair. ... What if the systems on my Jet 3 Ultra seem to be "dead" (controller does not light up when the on/off key is ... you continually allow the battery condition meter LEDs to fall into the red area, the ... 1 Flash. The batteries need charging. Check the battery connections.

Pride Mobility Jet 3 Ultra Troubleshooting This will help.

Talk to the maker of the chair, you'll probably need to replace the speed controller. You'll need the make, model and serial number of the chair when you contact them.

They are usually on the bottom half of the seat post under the battery cover

please contact a dealer tech,u may have a bad controller it happens

The footrest for this power chair comes in a wide variety of styles and configurations. To duplicate the correct footrest it is best to go by description of hanger, extension tube length, and footplate style or simply have the manufacturer run the serial number. The serial number will lock in the exact footrest configuration delivered with the wheelchair. With the SN a dealer can order individual parts that will fit and work correctly. This will ultimately will save you time and money. Hope this helps.

acampbel I went to pride website and could only find the manual for the Jet 3 ultra. I don't know if that manual can help you but goto pridemobility.com and select Jazzy chairs, scroll down until you see the picture for the Jet 3 Ultra click on the picture and you can download the manual from that page. Hope this helps you

Count the number of flashes IE 3 flashes a pause then 3 flashes this is a error code and tells the tech what the problem is. Without knowing the number of flashes I cannot help. If you have your owners manual there should be a page for error codes somewhere near the joystick page

oke dear

Serial number :

1. Ahead Nero 8.2.8.0 Ultra Edition:
1K22-0867-0795-66M4-5766-8538-75CC

2. Nero 8 Ultra Edition v8.2.8.0 :
1K22-0867-0795-66M4-5615-4898-M707

3. Nero 8.2.8.0 ultra edition :
1K22-0867-0795-66M4-5385-6216-CE18
1K22-0867-0795-66M4-5991-0082-7M13
1K22-0867-0795-66M4-5727-0767-A496
1K22-0867-0795-66M4-5490-9614-KEX1
1K22-0867-0795-66M4-5714-6005-1EX0
1K22-0867-0795-66M4-5239-1040-96A9