Blank LCD on Canon A95

http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a95#ServiceAndSupport

The above is the support page for the canon a95 digital camera.

http://www.usa.canon.com/cusa/online_repair_tracking/consumer/digital_cameras/powershot_a_series/powershot_a95?pageKeyCode=requestRepair

The above is the repair request page for canonusa.com.

This is known problem of ccd imager chip failure in Canon A95 camera, ccd imager chip need to be replaced to get live view in camera mode to take fresh pictures.
Local camera repair shop will help you to get it fixed because ccd imager chip replacement requires expertise and soldering work.

Hi,
If camera shows previously stored images in memory card in playback mode correctly but does not show live view in camera mode to take fresh pictures then its problem of ccd imager chip failure that will be replaced to solve the issue.
Canon offers free of cost ccd imager chip replacement for Canon A95 and few other models.
Click Canon CCD Imager Advisory for details.
Thanks.

u r not able to operate the camera,not able to get the image,so it is the lens,shutter problem,so take to camera tec.

Hi,
If camera shows old taken pictures properly in playback mode but does not show live view to take fresh picture then it got known problem of ccd imager chip failure that will be replaced to get it fixed.
Canon offer free of cost ccd imager chip replacement for A95 model.
Click Canon CCD Imager Advisory for details.
Thanks.

Is it Canon A95 camera and does not show live view to take picture?
Do you see old stored picture properly in LCD in playback?
If thats correct, your Canon A95 has problem of ccd imager, that will be replaced.
Canon will repair it free of cost, Click Canon CCD Imager Advisory for details.

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

This sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

your problem isinternal circuit fault the recording section is not working. which is not giving any signal to LCD . you nee dto give itr in service centre. fault may also come in change over switch which is not giving connection to LCD. Sangita