Klimaire compressor not running - Cfm Klimaire KSWG009H113 Split System Air Conditioner

Check web site for significance of the four flashes. Could be that it is overheating and shutting down due to excessive current consumption.

Check for correct voltage to unit short may have burned out breaker .

check that the controller is set for degree F not Celsius, cyccle breaker off and back on, change the batteries on the remote controller.


http://www.klimaire.com/media/klimaire_product_pdfs/503bfa1f27c95_-_SERVMAN.pdf

They do recommend when installing Mini's that you insulate both suction and liquid due to the variable speed compressors and how it is piped threw the system. Could be due to a restriction or a Txv valve that may be stuck as well not opening all the way properly.

I’m happy to help further over the phone at https://www.6ya.com/expert/michael_341f3f9dee622e54

If it were a car I'd say something to do with the belt. Maybe check that out.

The specs on that unit dont list the wattage of the head unit. I would be very careful about just tapping into the wiring in the wall. First off you need to know what the wire size is in the wall. The second thing is that you have to enclose it in a box if you tap it. The outside unit is another issue. It has to have its own source of wiring and it has to meet specs for outdoor use. So you will have to run a circuit just for that. No matter how you do this. You should have an electrical inspection done before it is finished.

hi, E1: communication error between indoor and outdoor unit.
Air Conditioning Fault Codes

I have a 3 unit split.
I found out that you can not have one unit set to warm and the other to cold. The compressor doesn't understand it.

Cycle off on and quickly re mode to Cool .
Do it to each unit and you will get it to stay on and then you can adjust.

Took a while for me but it did stay on after switching Mode at startup

You need to either get the specifications from the fan manufacturer, or take air readings with a manometer or flow hood

check your filter if its really dirty it will decrease your air flow