Canon pixma ip4600 says it cant print bc theres not paper, but there is. i cant figure out how to print.

1.change your usb cable it may be faulty
2.try different usb ports
3.try to upgrade your operating system,some older versions do not recognise some usb devices.
GOOD LUCK !!!

go to http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4600#ServiceAndSupport

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay lmkasdwt

If your Canon printer is capable, its called Duplex printing. You would go into the properties of your printer and if its available there then you can check it off and it will print on both sides of the paper.

1.remove the waste ink pad,and wash with water
2.Down load the free "ssc service utility" software (help of google search)
3.install the downloaded software in your system
4.then reset all chips using the software(especially counter chip)
5.now the printer will print properly

Looking at the number of problems posted for different printer makes I would go for an epson.

Check the photo paper sensor.

hi,

1. to print on a cd, there is a (cd sticker paper) available in the market, buy it and feed it in your printer...
2. to print on a cd, you should have special software such as... Nero Burn version 5.0/5.5/6.0/6.5/7.0,
this is a cd burning software, in this software you will find sticker designing option, where you can
select images or text to design the cd for printing..

It turns out that if you read the documentation VERY carefully it says that "if the application program specifies 8.5x11 plain paper and that is what is loaded in the front cassette you cannot print from the rear tray". It turns out that this is true even if you go to the printer driver and specify "rear tray" manually. The driver disregards the setting. You can force printing plain paper from the rear tray by going to the Canon "My Printer" icon and forcing ALL printing from the rear tray. If you do this, remember to change it back. You can also print plain paper from the rear tray if you specify the "allocation" option and the paper from the front cassette runs out. You can always print from the rear tray if the application that created the print job specifies something other than 8.5x11 without resorting to the forced override, e.g. printing a .jpg or .gif or something from an application like Paintshop or Printshop, etc.

Call Canon!
Page 30 of your manual,
http://gdlp01.c-wss.com/gds/5/0300001375/01/iP4600_GS_EN-US_V1.pdf

Also r4ad this apple thread: https://discussions.apple.com/thread/7560698?start=0&tstart=0