Question about JVC KD-SX770 CD Player

No audio output from jvc cd receiver kd-sx770

CD Player has been working fine and all the sudden I get no audio output at all. I've tried to reset unit a couple of times but still no audio. I have been looking online for a service manual or troubleshooting help but have yet to find what I'm looking for. If you can assist me in any way, that would be great.

Thanks
Candy

1 Answer

blueextc3221

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.
Master
15,935 Answers

The internal amplifier is at fault.

This will need to be repaired by a electronics repairman.
There is no end-user fix.

You may choose to, instead, use the RCA low level outputs and install a dedicated amplifier to power your speakers.

Verify the fuses on the radio are good, and that there is not a blown speaker causing the internal amplifier to shut down.

Thanks for using FixYa - a FixYa rating is appreciated!!

Posted on Feb 20, 2009

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

I NEED TO CLOCK SET

Please go to the link below page 20 will tell you how to set the clock.

http://resources.jvc.com/Resources/00/00/98/GET0019-001A.pdf

Apr 02, 2011 | JVC KD-SX770 CD Player

1 Answer

CD Player does not work. Can CD player be repaired?

If it is possible to repair only habria that to check it to repair the fault in general always checks what is the module of CD or the lens

Feb 03, 2011 | JVC KD-SX770 CD Player

1 Answer

I just purchased front speakers for my jvc kd-sx770. the connection to the previous fronts were cut by the previous owner of the car. i cannot find a wire diagram and just need to know what colors to...

front left negitive, white with black stripe front left positive, white
front right negitive, grey with black stripe front right positive, grey
I hope this has helped you and please dont forget to rate my solution.
cheers

Jan 15, 2011 | JVC KD-SX770 CD Player

1 Answer

Need help setting time on jvc kd-sx770

turn off the stereo then ull see the time only on ur set then u can set up!

Mar 14, 2010 | JVC KD-SX770 CD Player

2 Answers

Jvc kd-sx770 car stereo--radio works, but cd player doesn't

Hello beeswing70,

The player is recognizing that a CD has been inserted but is not able to read it.

Sometimes the lens assembly becomes contaminated and obscures the laser. I'd try using a commercial "lens cleaning CD" two or three times and then try a CD again. These lens cleaning CD's are widely available. If cleaning does not help, the player need professional service.

Hope this helps.

May 25, 2009 | JVC KD-SX770 CD Player

1 Answer

Dosent play burnt cds

Try to burn cd in 4x speed burn. Or try to burn the audio as CDDA format at lower speed burn.

Crackes usually appears when burn the cd at high speed.

Pls. leave a comment

Apr 10, 2009 | JVC KD-SX770 CD Player

1 Answer

I Bought A Truck With A JVC KD-SX770 Did Not Know How To Set Cloc

http://resources.jvc.com/Resources/00/00/98/GET0019-001A.pdf

Feb 17, 2009 | JVC KD-SX770 CD Player

1 Answer

Kd-sx770

You can buy it from pacparts.com

Dec 08, 2007 | JVC KD-SX770 CD Player

3 Answers

JVC KD-SX770

Per manual, you can lock a cd in by pressing and holding the power and cd button for moer than 2 secondsthe cd cannot be ejected. if acd is inserted upside down, please -eject appears.

May 18, 2007 | JVC KD-SX770 CD Player

1 Answer

Cd ejection

Look for a tiny, recessed Reset button on the front of the unit with the face removed. Press this button with a pen tip; it should spit out the CD and work correctly afterwards. This will also erase your station presets and audio settings.

Mar 13, 2007 | JVC KD-SX770 CD Player