I want to know what are administrator settings for Konica Minolta C-360, i dont have the password ..can i still access those settings

Logging in as an administratorSome of the settings available in PageScope Web Connection can only bechanged by an administrator.
These settings are only displayed when you login to the administrator mode.
Logging in to administrator mode
1 Enter the administrator password in the "Admin Password" box at theleft of the screen.
2 Click the [Login] button to log in to the administrator mode.
3 To log out, click the [Logout] button.
NoteThe default password for administrator mode is "sysadm".
Be sure to change the administrator password before using administrator mode.
If no operations are performed for 10 minutes, PageScope Web Connec-tion automatically logs out.
The machine cannot be used while you are logged in to PageScope WebConnection with administrator mode.
In addition, if the machine is being operated, the administrator cannot logon

To get to the network settings: Press the Utility/Counter key, select Administrator Settings, enter 12345678 as the password, then select network settings. You will find all the settings for networking the machine there. The print drivers can be downloaded from Konica's web site: kmbs.konicaminolta.us
User manuals can be found there as well.

are the paper tray matching the print driver selections what PAPER DRAW settings?? what are the print driver settings?

are the paper weights properly matching? what does the screen say when you send a print job to the copier?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

1-Press "Utility/Counter button from control panel.
2-Press "Administrator settings" from Touch screen LCD menu,
3-Enter "Admin Password" which is 12345678.
4-After entering the above password, press "ENTER" or "END" button, (appeared on top right side of menu).
5-After pressing the end or enter button you will be in administrator mode.

Now, if you are asking about the Administrator password, then the password is "12345678" This is the default administrator password of Konica Minolta bizhub MFPs and Photocopiers.

For any other queries, feel free to ask any time.

The Administrator setting will be available by entering the administrator password (8 dig-
its) The administrator password is initially set to "12345678."

Network settings are accessed through the Administrator menu. Press Utility/Counter, then choice #3 should be Administator Settings. Enter your admin password and Network Settings should be choice #5.
Also, if the bizhub is already on the network, you can enter the IP address into your web browser and log in as an administrator to get to the network settings.

To recover/change the Administrator password perform the following;
1. Enter the Service mode.
2. Press STOP-0-CLEAR to enter the Enhanced security mode.
3. Enter Administrator Password setting, and enter new Password.

Go to web browser and type the copier ip address click administrator the login password is 12345678. this the best way to access the network setting.

This are the the information you need to setup scan to email and maybe you know how to access the web browser to setup the network. first you need to know the smtp host name or ip address, second you must create a valid email address for the copier. To access the web browser input the ip addrress and press enter click administrator and the password is 12345678 or 8 zeros. there are tab system info print, scan and network. click the the scan tab. choose scan to email first thing you will see enable scan to email smtp ip address or host name. enter the right smtp. witch this you can get to your mail server. do not change the port # and that is 25. Input administrator email address and the machine email address and turn on the authentication enter your user id and a password iof there is any.