I need to know the ampere raitng or the wattage so I can size the electrical feeder to the cooktop

Hello friend, thank you for your post!

I understand that you are searching for the wattage on your Frigidaire range. In order to provide you more information I would need to have your model number. You can locate your serial tag (which lists your model number) on the outside of your cooktop base possibly on the edge or bottom under the unit. Once I have that information I can further assist you. I look forward to your response. -Matt

the use and care guide has the sizes

hi,
www.searspartsdirect.com
jm

A gas range requires minimal electric current. "Any ole" circuit will do.

Charlie

I can't imagine directing the downdraft vent back up to a traditional hood type system. Why bother, just don't use the downdraft or get a cooktop without a down draft and save money.

In granite, yes for any cooktop as long as someone can cut the correct size hole. Cooktops must be installed so the top is just about flush with the countertop. They all come with a template for cutting the right size hole in the countertop.

propane has more BTU, so has a small hole, NG has a laeger hole, when i last called a plumber, all he did was remove them and drill a larger hole...i don't know what the hole size was, but thats what he did. hope this helps

REPLACE IGNITOR FOR MIELE KM 412

http://www.repairclinic.com/SmartSearch/SSPartDetail.aspx?PartID=1048620&PPStack=1
try this link.
do not drill out the jets they will not work properly.
I would check all your documentation you may have the convention kit with your owners manual or it may be attached to the oven.

you need a three wire or two as long as you have the two hots and ground. dont skimp on wire size though. hope this helps

The outer ring of the element is most likely broken. You'll need to replace the element.