I need codes for URC-3021BOO universal remote

SOURCE: One for all universal remote model URC-3220 Attempting to program direct Tv receiver to remote. Need Receiver code number

Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC3220
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(www.sparky-uk.com)

Herb Box

• 117 Answers
• Posted on Dec 18, 2008

SOURCE: RCR451

Orion TV; 1030, 1035, 1191.
Emerson VCR/DVD; 2142/3391, 2148/3403.

SOURCE: URC-4021B00 codes

http://www.oneforall.co.uk/us_US/support

SOURCE: NEED CODE FOR ORION VCR

the code is 031

SOURCE: Need Universal Remote codes for Orion tv- One for All Remote

The TV codes for a URC-3021 and an Orion TV are:

0236, 0463

These are the steps to program your remote:

To setup your URC-3021 for a TV, these are the steps:

1. Turn on your TV.
2. On the remote control, press TV once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.
5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code until you find one that works.