Problem with electric single oven Tecnik tkc241/2

I would imagine that the cooker has an internal battery that powers the clock when the oven is not on mains power - since these are so old now, the battery, if THERE IS ONE NEEDS REPLACING.

Possible similar model Tecnik oven free manual:

https://www.manualslib.com/manual/654296/Tecnik-Oven.html#manual

Possible foreign source of information and assistance:

https://kremplshop.de/geraet/tecnik-tkc241-hb4ti5101-12625028

No you can replace timer or bypass it to make it work. I can source parts for you I and fit if required. David 'The Famous Forry'

If you cannot change it from auto. to manual it doesn't mean you need a new oven. The electronic timer can be by-passed fairly easily by joining the active and oven load wire together..

you have to set the clock befire anything works .if you have done that its could be that the element has failed and the fault current has damaged any of the contacts in the circuit which can be themostat ,timer contact thermal cut out contacts. failure of the timer contacts would leave nothing working

power to the main oven has to go through the oven clock if time is not set main oven will not work also if clock set on auto time rather than manual oven will not work conversley if clock is faulty it will not work top oven is unaffected as oven clock auto timer cannot be used on top oven.try resetting power of and on again reset time on clock if clock not faulty oven will now work.

if you have power to oven but the clock is not working it sounds like overvoltage has damaged the clock if clock will reset and you can set the time oven will work.

you have 2 buttons one pops out for adjustment the other is only a push button push the left hand one repeatedly till a red clock symbol shows at top of clock then turn right hand knob to set time wait a few seconds and clock will set itself.

I also have the exact same problem, is ther a possible fix-it-yourself solution for this???????????? if not what should a repair cost?????

hi joe. thanks for the question . you replace the clock to repair your problem . i have seen this happen on a regular basis . thanks the appliance doc