- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can buy an assortment of universal support bracket or universal stands at stores like walmart, Best Buy etc.... Check the back of your insignia and you will see the threaded holes made for this kind of bracket. I bought a 42 inch flat screen and bought a combination table/mounting bracket. It's great. Make sure you get a bracket that matches or exceeds the weight of the TV though. Good luck and feed back if u can.
Otherwise you can just buy a generic wall mount floor stand for around $100 which bolts to the TV like a wall mount, but actually sits on the floor instead of being bolted to the wall.
Here are some links to a few different models currently available on Ebay which include pictures so you can see what I mean:
these are removal instructions should be helpful though
Open up the panel on the back of the TV which covers the various input
connections. At the bottom of the area previously covered, there are 8
screws (two rows of four screws). Remove them, and the entire stand
should now slide right out of the TV. You can then replace the screws
back in their holes, so you don't lose them. You do not need to
disassemble the stand to do this.
they are couse scews your best bet is go to lowes or home depot and get a few of each 1/4 inch screws to see which one fits they only cost about .03 each
please rate my answer it is much apreceated
×