Jenn air w130 door removal - Jenn-Air 27 in. Electric Single Wall Oven with Multi-Mode Convection

jenn air wall oven

dont like the design of the hinge itself

door section has to be locked in ..
but by the design of the door capture sure looks like
the door can be removed for easier cleaning

We are getting rid of this oven - I killed it. I have the manual for it. If you want it, please let me know - it does give instructions on how to remove the door. Please contact me via my contact page through my website at www.compassionatechild.com - if you want the manual.

Hi. It could be your thermostat not sending power to bake element. If elements are really burning out that fast, check the voltage coming to stove. If more than 220 volts, could be a problem with the power coming into your home. Check also the element if it has continuity.

check the power

28" High
24" Deep
30.5" Wide

from tech support

HI. This error code is indicating that there are several issue that concern the integrity of the main oven control board. This damaged control board will need to be replaced asap. Once replaced, the unit will operate correctly.

This is a known issue. The model number is JJW9530C. I have been browsing the internet trying to find stronger hinges but with no luck. It seems there are a lot of unhappy Jenn air owners. You are correct in your assumption that the door is to heavy for the hinges. I will post the websites for your review

http://www.ovensworld.com/jenn-air-jjw9530c-expressions-collection-electric-single-oven.html

Maybe if I could see the hinge I could fabricate a stronger stainless steel one for you

good day,
hope this link below will solve your problem.

kitchen

It might be because when the door was completely removed ( which they do rather easily for repairs and moving) it wasn't put back properly.
I would suggest you remove the oven door and re install.
You do not remove any screws or anything like that to remove the oven doors.
When you have the oven door open squeeze each hinge and shift then both outwards it will release the door from the hinge, the hinge stays on but the door will slide off the hindge. Afterwards check the alignment and reinstall the oven door

First, with the door closed, find the screws at the bottom of the door and remove. With an assistant, open the door and remove any side and inside screws you find. The door will separate into two halves. Be aware that most glass is not clipped in...they can fall and break. Remove the front panel from the door...the door may try to slam shut. To clean the glass, use a blue cleaner and a scrubby or very fine steel wool rubbing gently. Scratches are not allowed! Take pictures of what you're doing so you can replace. Be careful of brittle door insulation.