Xerox 550 fault code 010-320 - Xerox 5500/DT Laser Printer

Try disabling it.

4112 / D95 families - Fault Code 077-313 : Multi-Feed Sensing Problems. First ... You have the choice to disable the Multi Feed Sensing feature on the machine if you fail to repair the problem or if you have a hard time sourcing the sensor or the board. The NVM Setting code is: 742-268.

4112 / D95 families - Fault Code 077-313 - The Parts Drop

The Parts Drop https://www.partsdrop.com > index.php > 4112-4127-d9...

Fault Code 077-313: Oversize High Capacity Feeder Fault

Xerox https://www.support.xerox.com > en-us > article
Sep 21, 2015 - Fault Code 077-313: Oversize High Capacity Feeder Fault · Try these solutions · Did this help?

Error Code Xerox 4112 Error 077-313

Copytechnet https://www.copytechnet.com > ... > Xerox
Sep 6, 2019 - Cause: Multi Sheet Check Sensor Actuator loose due to torsion spring disconnected from the arm. Due to improper removal of paper jam at Registration Roll.

Jamming Error 077-313 and error 075 - 211
Nov 30, 2016
Xerox 4127 cp error 077-313
Sep 24, 2016
Error Code xerox 700 077-311
Jan 11, 2021
More results from www.copytechnet.com

Question edited for clarity.
Please don't type in all CAPS, it is considered SHOUTING which is rude and it makes it harder to read. Lower case additions are mine!

You need a service call

Error code 045 315 - Customer Support Forum

https://forum.support.xerox.com > Hardware > Error-co...
Nov 29, 2021 · 2 posts
Please take a look at this article about the Fault Code 045-315 in the online support for your machine. Please consider contacting your support ...

• 
  

  Fault Code 045-315: Video Line M Fault - Support - Xerox

  https://www.support.xerox.com > en-us > article
  Sept 21, 2015 - Fault Code 045-315: Video Line M Fault · Try these solutions · Did this help?

Error Code 045-315 - Copytechnet

https://www.copytechnet.com > ... > Xerox
Oct 18, 2019 - Check, replace Y M Ros unit. Or replace bad MCU pwb.
Xerox 700 error code 045-315
Sept 8, 2019
xerox 700 error code 045-316
May 31, 2019
Error Code Xerox 700 Fault Code 045-360
Sept 25, 2017
Xerox 700 Help please
May 20, 2017
More results from www.copytechnet.com

Xerox 700 color press error 045-315 - Color Printing Forum

https://www.colorprintingforum.com > threads > xerox-...
Aug 17, 2013 - I believe that error is referenced as being a YM (yellow/magenta) ROS assembly fault. This is the black box laser mirror assembly. xfactor ...

You need a Service Call

Fault Code 10-355: A Hard Overheat Fault has been Detected in the Fuser Assembly. The Heat Roll Overheat Thermistor, the External Heat Roll Overheat Thermistor, and the Inlet Roll Control Thermistor all Indicate an Over Temperate Condition.
Aug 13, 2015

Fault Code 10-355: A Hard Overheat Fault has been Detected ...

https://www.support.xerox.com > en-us > article

Fault Code 08-311: Registration Side Shift Motor Fault

https://www.support.xerox.com > en-us > article
Aug 13, 2015 - Fault Code 08-311: Registration Side Shift Motor Fault. Article Id: 1088027 ' Published: 08/13/2015. Product support for.

Try this link:

https://www.support.xerox.com/support/xerox-color-550-560/support/enus.html

http://www.manuals365.com/swf/fuji+xerox/ag-c560p_c550p.html?page=207

Error Codes and Support

Web page above states:

Error Description: Drive Logic Fail Solution: 1.Recycle your printer 2.Check all connections to the Engine Control Board 3.Make sure the correct firmware is installed. 4.If the error continues replace, the Engine Control Board (MCU PWB)

Manual for free download at link below:
Fuji Xerox Color 550 Administrator Manual Page 205

you need a service pack to install. the code is a programming mistake/ inability to deal with rotating something see this link and check your software version to see if you need the SP. I guess you do. http://www.support.xerox.com/support/xerox-color-550-560/file-download/enus.html?operatingSystem=winxp&fileLanguage=en&&associatedProduct=XRIP_550_integrated_Fiery&contentId=120034&from=downloads&viewArchived=false

Black toner dispense fault. Check for obstructions on dispensation of black toner to the developer housing . Then NVM 362-371 if it 3 you must reset it to 0

Any help hear please

the 061-340 is for laser failure in xerox devices