Question about Jura Capresso Ultima 121 Espresso Machine

3 Answers

Need drawings for capresso ultima 121

A 4in internal hose fell off, but can not find where it belongs. Now no water goes through the coffee, but I can hear it flowing inside. An diagram would show where the parts fit.

Posted by lionel0201 on

  • Anonymous Mar 25, 2009

    I have the same problem...did you ever find out where the hose goes?

×

Ad

3 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

I don't know where this tube goes, either. I emailed Capresso asking where it belonged, but their reply was to give me their service number, so that they could arrange for service. Apparently not considered a user-serviceable part. Sorry.

Posted on Apr 05, 2010

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Is it white or green? the two green tubes in the ultima 121 are for carrying water. although I do not see one which is 4" long (they are longer). White tubes are used to protect the smaller clear 1/4" tubes (hot and under pressure)

Posted on Oct 11, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Try this sight
www.saecoparts.com/SaecoEspressoClassicoBodyparts.html - 70k -

Posted on Feb 17, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Ultima model #121. I haven't used it in a year and tries to this morning. Water comes out the bottom.


The first thing to check is the seating of your water tank. Just a few grains of coffee grounds or dirt underneath the tank are enough to break the watertight seal. Make sure the area under the tank is absolutely clean.

That's always worked for me when I've had the leaking problem.

Oct 15, 2015 | Jura Capresso Coffee Makers & Espresso...

1 Answer

Why does my coffee maker Capresso Team GS leak water?


Hello, what I have found is the most common cause of water leaking out of the bottom of the capresso team coffee maker is a leaking silicone hose that runs to the boiler (See the photo below with the split in the hose). The replacement silicone hose needs to be safe for beverage dispensing, food & dairy processing, taste and odor-free, with a temperature range of -75? to 350? F. All you need is a sharp pick, a phillips screwdriver, and a pair of needle nose pliers. Remove the four rubber pads on the bottom using the pick. Use the screwdriver to remove the six screws holding the bottom plate on. Remove and replace "BOTH" hoses using the needlenose pliers to pinch the hose clamps. Better to play it safe while you have it apart. If one is bad the other is likely not far behind. I hope this helps. acccadfd-0d5d-4c31-b1b9-a56192db9bc2.jpg

May 09, 2014 | Jura Capresso CoffeeTEAM GS 46405

1 Answer

Leaking water


If it's clean water which runs out, check the hoses going from the water tank to the pump then through the boiler to the brew group. If coffee is running out instead, then it's the spout going from the brew group to the cup. I know Saeco's not Juras but they all function the same way.

Mar 23, 2013 | Capresso Jura-13204 Impressa E9 Automatic...

1 Answer

Capresso Ultima 121 rubber tube placement


I have the exact same tube that fell out of mine. Does your still work? I assume it has something to do with baffling the air intake for the frothing area.

Sep 15, 2009 | Jura Capresso Ultima 121 Espresso Machine

1 Answer

Capresso Ultima parts


Capresso told me the only way to buy it is the $90 entire top assembly.

Aug 11, 2009 | Jura Capresso Ultima 121 Espresso Machine

1 Answer

Carousel will not turn


You can order a new carousel from Capresso. It's $90, though:

http://www.capresso.com/pdf/order-ultima.pdf

Make sure the lever is up when turning the carousel, and keep the button at the back of the machine depressed while screwing the carousel onto the unit (and while taking it off the unit). I think the positioning of the button point at the beginning of the carousel replacement process is also important:

http://capresso.com/pdf/inst_esp_ultima.pdf

Mar 28, 2009 | Jura Capresso Ultima 121 Espresso Machine

Not finding what you are looking for?
Jura Capresso Ultima 121 Espresso Machine Logo

Related Topics:

890 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

markybean

Level 1 Expert

41 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...