Headset kenwood khp-ir71 how do I pair it with a iphone

Pairing with iPhone

1. Connect the iPhone Dual Dock or iPhone Bluetooth Travel Cable to a USB 2.0 port on your computer (not on the keyboard).
2. Connect iPhone and the headset to the dock or cable. The headset pairs with iPhone automatically.

Pairing iPhone Bluetooth Headset with another Bluetooth-enabled deviceTo pair the iPhone Bluetooth Headset with another wireless device, such as a Bluetooth-enabled phone or computer.
Step 1: Set the headset to be discoverable

1. Turn off the headset.
2. Press and hold the headset button for about eight seconds, until you hear the startup tone and then five quick high beeps.
   
   The headset is now discoverable and will remain so for about five minutes. The status light blinks while the headset is discoverable.

Step 2: Turn on Bluetooth on the other device and search for devices

1. On the device, turn Bluetooth on and set the device to search for other Bluetooth devices.
2. On the device, choose iPhone Bluetooth Headset and enter the PIN code 0000.

See the instructions that came with your other Bluetooth-enabled device for more information about pairing it with Bluetooth devices.

Here is something to try on your iPhone. Hopefully it should fix your problem.

On the iphone, delete all the headsets you may have used from the UI of the iphone.
Turn off the headset.

Warm reset the iphone, press and hold the home and power keys on the iphone for 10s, the screen will go blank and the phone will reset.

While the iphone is rebooting, turn on the headset again and put it into pairing mode with the LED flashing red/white, red/white ...

Now when the iphone is ready, make it search for the headset.

When you see the "9xxPlantronics - Not Paired" entry on the iphone UI, then tap the screen where this message is displayed and the iphone will pair to the headset.

Good luck from Headsets Direct - 800-914-7996.

Hold the "Answer/End" button on your Jabra Bluetooth headset down until the LED light on the headset turns solid blue. The location of the button may vary based on which headset you have, but its appearance will be the same; it is the button that has an image of a telephone on it.


Click on the "Settings" icon from the main screen of your iPhone 4 .

Click on "General" in your iPhone's "Settings" menu.


Click on "Bluetooth" to access your iPhone's Bluetooth menu and then click the option to turn on your iPhone's Bluetooth connection. Once your iPhone's Bluetooth is turned on, it will search for available Bluetooth devices.


Select your Jabra headset by clicking on the icon that appears on your iPhone's screen.


Enter the passkey for your Jabra Bluetooth headset. The default passkey on Jabra headsets is "0000."


Click on "OK" on your iPhone 4 to complete the connection to your Jabra headset.

Tips & Warnings



The LED light on your headset must be solid blue to pair to your iPhone. A flashing light indicates your headset is not yet in pairing mode and your iPhone will not be able to connect to the headset.

Having your iPhone 4 Bluetooth turned on will drain your phone battery faster than normal.

Hi, the iPhone 3G definitely does work with bluetooth. In fact, I'm talking on a bluetooth headset with my iPhone 3G right now.

You have to put both your Southern Telecom Emerson Bluetooth Headsetand the iPhone in "pairing mode".

On your iPhone, click the Menu button, tap the Settings icon, tap the General icon, and then tap the Bluetooth icon. Make sure that 'Bluetooth' is set to "ON" and not "OFF". As long as you have this screen up, your iPhone is in pairing mode.

Turn your Southern Telecom Emerson Bluetooth Headset off and wait a few seconds. On your Southern Telecom Emerson Bluetooth Headset, press and hold and Answer/End button for Five Seconds, until a solid blue light comes on, which places the device in Bluetooth discoverable mode.

Now that both devices are 'discoverable', the Southern Telecom Emerson Bluetooth Headset will show up on that Bluetooth screen on your iPhone. Be patient as it might take a minute to appear. Tap on the Southern Telecom Emerson Bluetooth Headsetin the list on your iPhone, and then it will ask you for a passkey. The passkey is "0000" (without the quotes). After you enter the passkey, the Southern Telecom Emerson Bluetooth Headset will show up on the list with the word "Paired" next to it.

Now you're paired! Incoming calls will automatically be passed to your headset as long as your iPhone can find it nearby.

Good luck.

Hi,to complete the look of a tech-savvy, iPhone-using individual, you must have a Bluetooth headset to accompany it. You can pair any Bluetooth headset with an iPhone. The Motorola HS850 is no exception to this. Both Motorola and Apple's Bluetooth set-up process is fast, so you'll be talking with people through your new Bluetooth on your iPhone in a matter of minutes.

Instructions

Charge the Motorola HS850 headset fully before attempting to pair. Usually, it takes two to three hours to charge the headset.

Press and hold the "Call" button (has a phone icon on it) on the headset for six to 10 seconds. The outside LED light will turn on indicating that the phone is in pairing mode.

Choose "Settings" on the iPhone homescreen.

Select "General," then "Bluetooth."

Select to turn Bluetooth on.

Wait for the phone to search for in-range devices.

Select theMotorola HS850 from the list of devices.

Enter the headset passkey to complete the pairing. By default this is "0000."

Have a nice day..

Once you make your iPhone discoverable, then put the Plantronics Voyager Pro headset into pairing mode by holding the power button until the headset flashes red and blue. Here is the link below for the Voyager Pro pairing instructions.

Plantronics Voyager Pro Pairing Instructions

Good luck from Headsets Direct!

Hi there Gerald,

Im still here stuck with our conversation. Since I was able to make your pairing work with the KCA to the laptop, can we continue with the session?

click on "settings"
click on "General"
click on "Bluetooth"
If Off, click it ON
It should start searching for devices to pair with (make sure your other device is on and "discoverable")
If the iphone locates the headset it should prompt for the code.

Is this the first time you're pairing iPhone and jawbone or it's been working before?
If this is the first time,
1. Go to settings-general-bluetooth and turn on the bluetooth on your iPhone 2. Press and hold the button above the LED light until the LED light flashes Red and White 3. Go to your iPhone and click on Jawbone and it should connect.
If it's been working before:
1. Make sure Jawbone is fully charged. 2. Press and hold the button below the LED until white light blinks 3. Go to iPhone make sure bluetooth is on press Jawbone to connect
If this procedure fails try the to follow the First Time Pairing Instruction

Hope this works for you.

Here is a link to a list for your bluetooth: http://www.kenwood.com/bt/bt100/en.html