Question about Keurig B50 Coffee Maker

2 Answers

Keurig B70 Not Ready Message

Just bought the B70, plugged it in, filled the water tank, and pressed BREW to prime machine.

Now it is just flashing NOT READY.

How the heck do I reset this thing and get it working?

Posted by lvs2read on

Ad

2 Answers

Jeffrey parks

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 10 Answers

Push the 2 buttons next to menu at same time then press menu. Wait for keurig lights to blink then release buttons. You just reset your keurig. Turn on and enjoy.

Posted on Aug 17, 2016

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 25 Answers

Unplug the unit for 20 seconds- 1minute. Plug it in again. You should be able to program from the menu. Hope this works.

Posted on May 14, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why does my keurig brewer say prime. I brewed one cup but now it says prime and won't brew

If you lift the water reservoir and then reseat it, then it will clear the prime message. If it repeatedly comes back then your machine is kaput. If it is still in the year warranty period call Keurig. They will ship you a new one.
0helpful
1answer

Says to prime

Lift the reservoir, then reseat it. This will clear the prime message. If it repeatedly comes back then your machine is dead. If in the year warranty, call Keurig they will ship you a replacement.
0helpful
1answer
0helpful
1answer

Why is the prime light on?

You lost the suction and prime necessary to transport water to the tank.
0helpful
1answer
0helpful
1answer

After every brew, my machine continues to run and then says prime. I have to take off the water reservoir each time to clear the message.

Hi,

There is air in the lines and it is blocking the water flow...
Here is a tip that will help you getyour Keurig to prime...

Keurig CoffeeBrewer will not prime
heatman101
0helpful
1answer

The display keeps flashing Not Ready. Water is full. I've unplugged the machine and plugged it back in. Why won't it get ready?

Hi,

There is air in the lines and it is blocking the water flow...
Here is a tip that will help you getyour Keurig to prime...

Keurig CoffeeBrewer will not prime
heatman101
2helpful
1answer

When I brew a cup of coffe, the brew message on there takes forever to stop saying it, even after it has stopped brewing

Hi,

There is air in the lines and it is blocking the water flow...
Here is a tip that will help you getyour Keurig to prime...

Keurig CoffeeBrewer will not prime
heatman101
9helpful
3answers

Reset Procedure?

I have a B60 and it does not have the "NOT READY" problem when I did the "priming" process. So I brought this B70 during Christmas this year, I had the exact "NOT READY" problem during the "priming" process like most of the people here. They sure DO have some engeineering/quality control issue here. No water was coming out and it looked like the pump had some kind of problem in getting water from the tank when the "priming" process was taken place. Instead of waiting a technican to call me back on Monday, I decided to ask my friend Google. It appeared there are a lot of people have the same problem and only ONE of the postings offered a solution and it WORKS!!! Here is the link and the extracted method in showing you how to reset the B70 so that you can retry the "priming" process. PS: You may have to try MANY times for the step #3 as described. http://www.all-about-coffee-makers.com/my-experince-of-keurig-b66-coffee-maker.html Fixed Not Ready Mode by: Anonymous Bummed - I talked to Keurig this morning (Dec 27, 2008). There are 4 steps to fix this: 1. Simultaneously press and release "small mug" and "medium mug". Immediately afterward press "menu" 3 times. (Menu is the black button under the display screen.) You should see a time 6:09 on your screen. 2. Press "menu" once. Your LCD screen should say Brew 0:00. 3. (I messed this step up like 10 times and had to unplug the machine, then replug it and start over at step one. You have to unplug if the LCD displays "auto ____". If it continues to flash "Not Ready" and "Brew" then you can just keep trying step 3). Press and hold "medium mug". While holding "medium mug" press and release "menu". Immediately after pressing "menu" (while still holding "medium mug") press "small mug". Release "small mug" and "medium mug" at the same time. This entire thing needs to be done very quickly. as soon as you release "menu" go to "small mug" and release both buttons quickly. 4. Unplug the machine (do not turn it off). Wait for 3 seconds or so. Plug it back in, turn it on and follow the instructions for priming.
GOOD LUCK :o)
Posted by: Harry at December 28, 2008 10:05 AM
Not finding what you are looking for?
Keurig B50 Coffee Maker Logo

3,163 views

Ask a Question

Usually answered in minutes!

Top Keurig Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2061 Answers

Oloyede Monsuru

Level 3 Expert

1468 Answers

Cindy Wells

Level 3 Expert

6347 Answers

Are you a Keurig Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...