Hi im joe, Regarding your concern the ET 3000 magic sing does not have background vocals at all. The manufacturer design the magic sing for sing along purposes only but they are now improving there future products to have that feature with background vocals.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you are watching a movie or such ,the you can't as that is how it is transmitted or produced
for many years now movie producers over ride vocals or words with back ground music and it is extremely distracting
Make sure the switch is set to "mic/line" and not "guitar"
Your input level will be set by the "input L" or "input R" knob, depending on which side you are using. Start with them all the way down and then sing into the mic, turning them up until you get a signal about halfway up the bar in Cubase. That should give you plenty of headroom for clean vocals.
It may be difficult to get a good sound if you have one of those cheap mics that has a "1/4" jack instead of a 3-pin XLR jack. You might want to go to your local music/pro audio store and invest in a "condenser" microphone, which is good for vocals in the studio.
You could record short "samples" to be used in building new voices, however, it does NOT appear that you can record a vocal song with the PSR9000. The Tyros II and III have the capability to record vocals but the PSR9000 and Tyros I do not..
When playing back an arrangement, you can re-sing the song and have the vocal harmonizer track the arrangement.
my aguen player is frezzing and i turn it on and the screen saver stays there and if i charge it, and turn it on it works but then when you want to turn it off the screen thing stays there and nothing happens you can't turn it off or on.
hi there...try this 1. turn mic off 2. press and hold 8, then press power button (to change to NTSC) press and hold 9, the press power button (to change to PAL)
Mr. Sean A. DelCarmen Customer Service Dept. In A Jiffy Ent. - Wow Magic Sing 1081 EDSA Balintawak Quezon City 1106 Philippines [email protected]
There's a multiplex button (MPX maybe) on the left front of the player. By hitting it you get leads only, background only or both. Be sure, though, you have a multiplex CD. Otherwise you'll only have background and no lead. I learned the hard way. Watch or scan for multiplex or lead vocals. Good luck...
hi there..if there is video and background audio coming out from the TV, and no voice recognition from the mic- then mic is the problem. I believed the problem is the "voice coil". This is a part that can be replaced- you can contact me and we can repair that.
two ways to check remove the mic ball the part which the mic ball is is covering is the voice coil. try holding both terminals (black and white wire)- if there is feedback sound- it is open and need to be replaced try using your tester- test the impedance- there should be 500- 600 ohms reading
×