AC Adapter Input 220-240V AC, 50Hz, 200mA, Output 15V AC 300mA, european standard plug

Sorry Gregory, gave you the wrong number.
You could try something like this. Various voltages and currents with different adapter plugs. This is on Ebay UK but I would think there are others, don't know where you are.
Ebay item number: 201154296095

Specs:
1.Rated Input Voltage: AC 110V or AC240V
2.Vibration Input Voltage Range: AC95V-265V
3.Input Rated Current: 0.4-0.6AMP
4.Input Power: 90W
5.Efficiency: >88%(TYP)
6.Out Power: 90W
7.Output voltage: 15V/16V/18V/19V/20V/22V/24V(0/+0.5V NOLOAD): DC15V-24V
8.Output voltage: 15V/16V/18V/19V/20V/22V/24V(-0.4/0.5V@rating load): DC15V-24V
9.Output current: 15-20V/4.5A@22V-24V/4.0A: 4.5AMP(max)
10.Overload protection: YES
11.Short Circuit Protection: YES

Contact The point of purchase. The phone should come with a charger. Or you can contact Looking For Help to find a replacement.

Mark
Motorola Support

This is High Quality original LINKSYS AC Adapter Charger

Input Voltage: 100V-240VAC (50-60Hz)
Output Voltage: 12v1a

Model: AD12V/1A-SW

DC Plus Dimension: 5.0mmX2.1mm

Compatible Models:

WAG300N

WRT54G

WRT54GS

WRT300N

Linksys Routers

SPECYFIKACJA :

• V detection
• Cigarette lighter plug
• Double output
• Discharge function
• Dla Ni-Cd/ Ni-MH battery
  

• Input voltage: 230V AC, 50Hz, 13.8V do 24V DC

• Output :
• Dla 230V AC or 24V DC input: 5.6V DC (4 celle) do 11.2V DC (8 cell)
  • Dla 24V AC input: 5.6V DC (4 celle) do 8.4V DC (6 cell)

• Output regulowany : 1,000/2,000/3,000mA

Hi,the best info is ;
Electrical power Handset - 450mA Li-ion rechargeable battery Pack
Base unit - 7.5V DC 300mA
Charger pod - 9V AC 300mA
Just to make sure and verify this info , pls look closely to the power plug input of the telephone unit it should be a molded some figures i.e. 9VDC and ( -)(+) reminder for the tip of plug of adapter
Hope this helps! Take care and please Remember to rate/vote and
give me 4 Thumbs Up for me to continue for Helping out the Community :)
Thanks
-------------------------
M&S technology customer services:
tel 0845 671 0665. Mar. T04/ 8811 /

www.binatonetelecom.com

It is depends on your scanner power adapter and where u purchase the scanner from. Here if your scanner is from US then the adapter power input should be 100-120V 60Hz AC, if your scanner is from Euro, UK or Australia, the it should be 200-240V 50Hz AC, while if your scanner is from others place that not listed above then it should be 100-240V 50-60Hz AC.
But the best way is look at your adapter itself, u'll notice the power input and output from the adapter sticker.

If you lost your adapter then be sure to purchase 1 that can output a 12 VDC, 340mA, 4.22W adapter to the scanner.

YBC (/\)

Model: PPI-0930-UL
INPUT: AC 120V 60Hz
OUTPUT: DC 9V 300mA
Polarity: Neg.outside, Pos.inside

I live in the Philippines, but I've got relatives in the US who send me gadgets as gifts. I've had the same problem with my laptop before but when I called HP call center, they said that as long as it says there input 100 - 240V, then it's ok to plug it in a 110 or 220 socket. Here in the PH, we have 220V sockets, but Americans use 110.

Anyway, your phone says it can only be plugged to a 120V socket (max) so that means, you have to use a transformer (that's what we call it here. a black box-like thing) to convert the volts from 220 to 110. If you plug your phone directly, it might explode.

I hope i answered your problem.

I doubt you can use 300 mA adapter,because Oly C2100 needs 2000 mA at 6,5V. E100RS construction seems to be very similar.