Can't use nextar gps x3-02.

The lightning bolt indicates that the battery is being charged. Remove the unit from the charger and the lightning bolt will go away.

nextar gps is stuck on the screen right after boot cannot navigate

want maps updated

want maps updated my nextar navigation is working

No, the camera is not waterproof.


Touch the lightning bolt icon area until the flash icon appears on the left side of the display. This will activate the flash.

Touch the lightning bolt icon area again until the flash symbol appears on the LCD screen. This forces the flash function.

Touch the lightning bolt icon area again until the eyeball icon appears on the left. This activates the red-eye reduction mode.

To turn off the flash, touch the lightning bolt icon area again until the no-flash icon (lightning bolt inside a circle) appears on the left.

This is covered on pages 13-14 of the manual. If you've misplaced your manual, you can download one from the manufacturer's web site at http://vivitar.com

i have a nextar x3-08 i got problem like when i start gps then 4 icon display but i click on car icon its getting frozen i can't do anything with it. Another 3 is working like cd,camera,and setting icon. so, please anyone solve this problem

Since the operating system and navigation software are preloaded into the internal flash memory of the GPS, the freezing may either be software or hardware failure. First, press the "Reset" button or push the stylus into the "Reset" hole, to see if the navigation software can load successfully. If the program still does not load, then the software may be corrupted. Also, if the internal memory fails to read or write and the software cannot load properly, it may be caused by hardware failure. In this case you must return the unit for exchange or repair to the retail location from which you purchased it, or contact Nextar for further assistance.

For technical support for your Nextar GPS see http://www.nextar.com/frontend/support.asp or you can phone them on 888-849-0846

1st hold on reset button located on bottom right for 3 secs. then hold down power button until the boot menu comes on. then press reboot or update os

Since I first turned on my unit it uses Sarasota as it home to travel. How do I change the home to be my address instead for the home location?

Nextar X3 08 gps suddenly doesn't respond to touch in the navigation menu. It turns on etc but doesn't move to the menu for entering addresses...