Question about Dremel Variable - Speed Multipro Rotary Tool 395

1 Answer

Have Dremel MOD 395 motor runs and speed control works bot shaft won't turn--worth fixing ??? and how

Sounds like everything is working but shaft won't turn.

Posted by Larry Rickman on

Ad

1 Answer

Rob Jamison

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Hi Larry, The tool that you require parts for was discontinued many years ago. Limited parts are available from Dremel. Inside the tool is a flex coupling and spline driver. The flex coupling is # 2615294309 and the price is about $ 1.25. This is the hollow plastic sleeve about 1" long with grooves on the inside, that goes between the motor shaft and the output shaft. The spline driver is # 2615294308 for about $ 1.00. Spline driver sits on the direct end of the motor shaft. The flex coupling sits over the spline driver. Spline driver is about 1/4", hard plastic with grooves on the outside. Total shipping for orders under $ 5.00 is $ 2.50. Orders over $5.00 is $ 4.00. There could be a tax charge depending on which state you live in. Here is how to order: Call Dremel Customer Service at 1-800-437-3635 , Monday-Friday from 7 am to 6 pm central time. VISA, MasterCard or Discover to place a Visa, MasterCard or Discover order. To order by mail: Dremel 4915 21st Street Racine, WI 53406 USA 1-800-437-3635 ext. 3636

Posted on Feb 14, 2013

Ad

2 Related Answers

Anonymous

  • 1 Answer

SOURCE: My Dremel tool motor still works but shaft won't turn?

Here's the email from I got from Dremel (in my case the flex coupling broke):
Inside the tool is a flex coupling and spline driver.

The flex coupling is # 2615294309 and the price is $ 1.25.
This is the hollow plastic sleeve about 1" long with grooves on the
inside, that goes between the motor shaft and the output shaft.

The spline driver is # 2615294308 at $ 1.00.
Spline driver sits on the direct end of the motor shaft. The flex
coupling sits over the spline driver. Spline driver is about 1/4",
hard plastic with grooves on the outside.


Total shipping for orders under $ 5.00 is $ 2.50. Orders over $
5.00 is $ 4.00.


I have provided ordering instructions below.

To order by phone: 1-800-437-3635, Monday-Friday from 7 am to 6 pm
central time. VISA, MasterCard or Discover is accepted.

To order by mail:
Dremel
4915 21st Street
Racine WI 53406

Posted on Apr 17, 2010

Ad

Joe Hogan

  • 10865 Answers

SOURCE: I have a Dremel model 395, type 3 that runs but

hello. yes. go to dremel.com and get new brushes for your tool.
ps kindly rate my answer as helpful. thank you. Joe

Posted on Feb 17, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flex shaft attachment won't work


find the little square attachment and place on the end of the dremel tool. I didid the same thing. Worked fine after I put the other part on.

Nov 06, 2012 | Dremel Variable - Speed Multipro Rotary...

1 Answer

Dremel 3100 won't release the drill bit. Button at the top is pressed in and won't come out.


The button is only to keep the shaft from turning while you loosen the collet (the nut) with the little wrench. THEN the tool comes out.

Sep 25, 2012 | Dremel Variable - Speed Multipro Rotary...

3 Answers

My Dremel tool motor still works but shaft won't turn?


Here's the email from I got from Dremel (in my case the flex coupling broke):
Inside the tool is a flex coupling and spline driver.

The flex coupling is # 2615294309 and the price is $ 1.25.
This is the hollow plastic sleeve about 1" long with grooves on the
inside, that goes between the motor shaft and the output shaft.

The spline driver is # 2615294308 at $ 1.00.
Spline driver sits on the direct end of the motor shaft. The flex
coupling sits over the spline driver. Spline driver is about 1/4",
hard plastic with grooves on the outside.


Total shipping for orders under $ 5.00 is $ 2.50. Orders over $
5.00 is $ 4.00.


I have provided ordering instructions below.

To order by phone: 1-800-437-3635, Monday-Friday from 7 am to 6 pm
central time. VISA, MasterCard or Discover is accepted.

To order by mail:
Dremel
4915 21st Street
Racine WI 53406

Dec 06, 2009 | Dremel Variable - Speed Multipro Rotary...

1 Answer

Motor works but no drive to shaft.


My 15 year old Dremel 395 had the same problem so I took it apart. There is a plastic spline between the motor and the output shaft to the chuck . My plastic spline was split and had many of its teeth sheared off. The shaft lock acts on the output shaft side of this spline, so it was ok. Otherwise everything looked great; bearings ran free & had little play free, brushes ok. To be fair, my Dremel had seen hard use & doesn't owe me anything. No luck so far finding replacement spline parts, which if available should be easy to install. To take apart your tool, just google "Dremel Disassembly". GOOD LUCK!

Nov 28, 2009 | Dremel Variable - Speed Multipro Rotary...

1 Answer

Dremel 395 in the middle of drilling sea glass and the collet and bit stop turning while the motor is still running fine! GRRRRR Thanks for any suggestions!


sounds like the rubber connector between the motor and collet.i use rubber tubing and hot glue to keep it working. bad news is you have to disassemble it to install a new connector.

Jul 13, 2009 | Dremel Variable - Speed Multipro Rotary...

1 Answer

Motor runs, collet doesn't turn


get a hot glue gun and go to your local hardware store and buy a piece of tubing to fit the collet shaft fill with hot glue and press it on the shaft.

Jun 19, 2009 | Dremel Variable - Speed Multipro Rotary...

3 Answers

Dremel 395 Type 2


REFERENCE M/N: 395 - Type 3 - Dremel does not have the parts listing on their site for some reason. I actually have the original I saved from 1988!
The part number for the Nylon Coupler is:
Illustration Code Number: 5
Description: Flex Coupling
Part Number: 529430970

This is all from Drawing (Form) Number:5296074 10-88

Jun 15, 2008 | Dremel Variable - Speed Multipro Rotary...

Not finding what you are looking for?
Dremel Variable - Speed Multipro Rotary Tool 395 Logo

574 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dremel Tools & Hardware - Others Experts

Mike

Level 3 Expert

4369 Answers

Sheldon Dedek

Level 3 Expert

912 Answers

Van Allen
Van Allen

Level 2 Expert

277 Answers

Are you a Dremel Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...