Will not scan, goes into warm up mode and then turn power off and

You will have to get the vehicle scanned to find out what is wrong. The vehicle won't accelerate properly because the transmission control unit has gone into limp home mode (this is to protect the transmission from any further damage). When the trans goes into limp home mode, it goes into high gear and stays there when moving. There will not be any kickdown mode either.

Hi,

First you have to enable the Bluetooth headset to scanning mode,
To do this, press and hold the power button continously for 10 seconds, you may have a stable LED, this shows that its in discoverable mode, Now perform scanning and you may get your device and you can pair and make it work


ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Hi,

First you have to enable the Bluetooth to scanning mode,
To do this, press and hold the power button continously for 10 seconds, you may have a stable LED, this shows that its in discoverable mode, Now perform scanning and you may get your device and you can pair and make it work
The default passcode may be 1234 or 0000 or 8888


ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Hi,

first you have to enable the Bluetooth headset to scanning mode,
To do this, press and hold the power button continously for 10 seconds, you may have a stable LED, this shows that its in discoverable mode, Now perform scanning and you may get your device and you can pair and make it work with passcode 0000 or 1234 or 888


ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Hi,

First you have to enable the Bluetooth to scanning mode,
To do this, press and hold the power button continously for 10 seconds, you may have a stable LED, this shows that its in discoverable mode, Now perform scanning and you may get your device and you can pair and make it work with the pair code of 0000 or 1234..


ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Hi,

First you have to enable the Bluetooth to scanning mode,
To do this, press and hold the power button continously for 10 seconds,
You may have a stable LED, this shows that its in discoverable mode,

Now perform scanning and you may get your device and you can pair and make it work to pir with defaulr code ie, 0000 or 1234 or 8888

ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Hi,

First you have to enable the Bluetooth to scanning mode,
To do this, press and hold the power button continously for 10 seconds, you may have a stable LED, this shows that its in discoverable mode, Now perform scanning and you may get your device and you can pair and make it work..The deafult pair code would be 0000 or 1234 in some case

ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Hi,

First you have to enable the Bluetooth to scanning mode,
To do this, press and hold the power button continously for 10 seconds, you may have a stable LED, this shows that its in discoverable mode,
Now perform scanning and you may get your device and you can pair using 0000 and make it work


ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Hi, first you have to enable the Bluetooth to scanning mode,
To do this, press and hold the power button continously for 10 seconds, you may have a stable LED, this shows that its in discoverable mode, Now perform scanning and you may get your device and you can pair and make it work


ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Check out tech help at HP website