241.01 error paper jam on t644n

Cleaned the paper pick up roller and also check to see that the paper is not bent in the paper tray.

To clear the error message Paper Jam after you removed the jammed paper, open and close the scanner cover.
If you still receive the error message, a small piece of paper may be stuck inside your Brother machine.

Refer the below link for the steps to remove any ripped paper remaining inside your Brother machine:

still receive the error message Paper Jam after removed the jammed paper...

If your printer has a paper tray, do not fill the tray. Overfilling the paper tray is frequently causes paper jams. Many printers have sliding mechanisms that allow different types and sizes of paper to be fed into the printer. If the slider is not correctly positioned, it can cause a paper jam.

Hi tkasirye,

Welcome to Fixya.

You may need to check again the error code. According to the manufacturer's checklist for error codes, only the following are documented;

1. Error Codes - Toshiba 2860
2. 
   

1. "E01" Paper jam inside machine. "E02" Paper jam near the fuser. "E03" Paper jammed inside machine when power supply is switched on. "E04" Front cover open while copying. "E05" Paper jam near the aligning roller "E08" Paper jam at stacking area in the ADU "E11" Paper feeding jam at the ADU "E12" Manual feeding jam "E13" Paper jam from cassette 1 "E14" Paper jam from cassette 2 "E15" Paper jam from cassette 3 "E16" Paper jam from cassette 4 "E17" Paper jam from cassette 5 "E19" Paper jam from the LCF "E21" Paper jam in transport route 1 (LCF) "E22" Paper jam in transport route 2 (COPIER) "E23" Paper jam in transport route 3 (ALIGNING) "E25" Paper jam in transport route 4 (PFP) "E71" Original feed jam in ADF "E72" Original transporting jam in ADF "E73" Original exiting jam in ADF "E75" 2nd original feeding jam "E81" Paper jam before sorter "E82" Paper jam in sorter "E83" Sorter early arrival jam "E84" Paper in sorter when power is turned on "E85" Joint open jam while copying "E88" Paper jam outside the sorter bin "C01" Abnormal operation of the copier main motor "C04" Abnormal operation of the PFP main motor "C05" Abnormal operation of the ADU main motor "C11" Abnormal operation of the ADU side motor "C12" Abnormal operation of the ADU end motor "C13" Abnormal operation of the upper cassette tray "C14" Abnormal operation of the lower cassette tray "C15" Abnormal operation of the PFP upper cassette tray "C16" Abnormal operation of the PFP middle cassette tray "C17" Abnormal operation of the PFP lower cassette tray "C18" Abnormal operation of the LCF tray "C21" Optics carriage initialize error "C22" Lens initialize error "C23" Mirror initialize error "C26" Faulty exposure lamp "C33" Easy set-up is failed "C35" Developer material exists at the transfer separation adjustment "C41" Faulty thermistor or heater "C43" Faulty thermistor "C44" Faulty heater "C45" Sub thermistor is open
   

Shoulg you not find any of these mentioned error codes, I suggest you contact the tech support especially if the machine is still under warranty.

Hope this helps.

Takasashi

What this light sequence means that the printer has a paper jam.

When a paper jam occurs, the printer stops and the operator panel's Paper Jam light and Continue button lights come on. Press and release Continue twice quickly to display the specific secondary error paper jam light sequence.

How to clear Paper Jam

?· Press Continue button twice quickly to see the secondary error code.

To get the secondary error codes

?· When the Error light (!) and Continue button lights are both on, a secondary error has occurred.

?· When the Paper Jam light (4th light) and Continue button lights are both on, a paper jam secondary error has occurred.

?· Press and release Continue button twice quickly to display the secondary error code light sequence.

Press Continue button to resume printing once all the jammed pages are cleared from the paper path.

We recommend that you clear the entire paper path when a paper jam occurs.

To clear a paper jam:

1 If you are feeding paper from a tray, remove the tray, and then remove any jams.

2 Open the front cover and remove the print cartridge assembly.

NOTE: Do not leave the print cartridge assembly exposed to direct light for an Extended period of time. Extended light exposure can cause print quality problems.

3 Remove any jams in the area behind the print cartridge assembly.

4 Lift the flap at the front of the printer and remove any jams beneath the flap.

5 Open the rear exit and remove any jams.

6 After you have cleared the jams, reinstall the print cartridge assembly, make sure all printer covers and trays are closed, and then press Continue button to resume printing.

NOTE: The printer reprints the pages that caused the paper jam.

Hi,

How to clear and avoid paper jams
Follow these instructions to remove and/or avoid paper jams and misfeeds in your Lexmark X3500, X4500, X4600 & X4800 Series All-In-One.
Paper jam in the printer
Remove the paper manually

1. Press to turn off the printer.


2. Firmly grasp the paper, and gently pull it out.


3. Press to turn the printer back on.

NOTE: Check inside the printer to ensure that all the paper is removed. Any small pieces of paper left in the printer will continue to cause paper jams.
Paper jam in the paper support

1. Press to turn off the printer.


2. Firmly grasp the paper, and gently pull it out.


3. Press to turn the printer back on.

Paper or specialty media misfeeds
These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together.
Try one or more of the following:
Check paper condition

• Use only new, unwrinkled paper.

Check paper loading

• Load a smaller amount of paper into the printer.


• Load paper with the print side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)

Remove each page as it is printed

• Remove each page as it exits, and let it dry completely before stacking.

Adjust the paper guides

• When using media less than 8.5 inches wide


• To rest against the edges of the paper or media, making sure it does not buckle
  

Printer does not feed paper, envelopes, or specialty media
These are possible solutions. Try one or more of the following:
Check for paper jams

• Check for and clear any paper jams. For more information, see "Paper jam in the printer" and "Paper jam in the paper support" above.

Check media loading

• Verify that the specialty media is loaded correctly.


• Try loading one page, envelope, or sheet of specialty media at a time.

Check printer default and pause settings

1. Click:
   • In Windows XP (default Start menu): Start Printers and Faxes.
   • In Windows XP (Classic Start menu): Start Settings Printers and Faxes.
   • In Windows Vista (default Start Menu): Control Panel Printers (under Hardware and Sound).
   • In Windows Vista (Classic Start menu): Settings Printers.


2. Double-click the print queue device.


3. Click Printer.
   • Make sure no check mark appears next to Pause Printing.
   • If a check mark does not appear next to Set As Default Printer, you must select the print queue device for each file you want to print.

Banner paper jams
There are many possible solutions. Try one or more of the following:
Clear banner paper jams

1. Press to turn off the printer.


2. Remove the jammed banner paper from the printer.

Review banner printing checklist

• Use only the number of sheets needed for the banner.


• Select the following settings to enable the printer to feed paper continuously without jamming:

1. With a document open, click File Print.


2. Click Properties, Preferences, Options, or Setup.


3. Select the Paper Setup tab.


4. From the Paper Size area, select Banner.


5. Select Letter Banner or A4 Banner as the paper size.


6. Select Portrait or Landscape.


7. Click OK.


8. Click OK or Print.

Regards,
Ron

Dell 2135cn All-In-One Laser Printer paper jam

Try:

• ERROR LCD: The paper is jammed. Clear the paper and press [OK].
• ERROR LCD: Rear Cover The paper is jammed. Clear the paper and press [OK].

I had a paper jam and removed the jammed papers. The paper jam cleared and then the Fatal Error 980 appeared. OKI C5500 printer

Open ALL paper jam locations on the machine. The jam code only means the paper jam is somewhere BEYOND the paper drawer. Check ALL jam locations including duplexer, bypass, and ALL paper drawers.