Question about Symbol Spectrum24 AP 3021 802.11b

2 Answers

Does the Symbol AP 3021 Access Point accept WPA encryption?

Symbol AP 3021-101

Does the Symbol AP 3021 Access Point accept WPA encryption?

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 52 Answers

On the info i could find it only supports WEP.
but if your issue is to be more secure look up if it supports a sort of mac filter.
this will only keep everybody out of your router but your signal will only be WEP encrypted.

Posted on Feb 09, 2009

  • aaron hobley
    aaron hobley Sep 18, 2014

    the AP3021 does not do WPA or any high security. we use the WEP key and Mac filtering


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

No the AP3021 does not support WPA.
We set the WEP and MAC filturing

Posted on Sep 18, 2014


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tips on how to connect my mobile to a wireless router in my room with a password

First of all your mobile should have Wi-Fi and support the encryption/security of your Wi-Fi access point.

If your Wi-Fi AP using WEP or WPA most of the Wi-Fi enabled handphones support it and the setup is quite straight forward.

I am giving generic guidelines as the model of your phone is not known.

Just do a wi-fi scan and create the new AP. When asked for the security select the appropriate (e.g. WEP or WAP) encryption and enter the key.

Close the app and start using it.

Mar 07, 2011 | Cell Phones

2 Answers

What is wpa or wep

It is the security code that is setup on the router to prevent an unsecure network

Dec 08, 2010 | Belkin F5D7234-4 Router

1 Answer

Does ap-4121 support wpa

No. The AP-4121 supports only WEP encryption. You can find more info here.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

Sep 18, 2009 | Computers & Internet

1 Answer

When we tring to ping for a work station the IP address is on time out?

timeout most likely means that you hit firewall on you way in ( there is router online

Jul 10, 2009 | Symbol Spectrum24 AP 3021

1 Answer

Zebra QL 420+ wireless printer works only without cipher/TKIP

With Label Vista
  • Go to Printer Tab
  • Define the com Port settings (use serial or usb)
  • Go to Printer settings

in network tab :
  • Put your network configuration ( IP address or DHCP,submask, gateway; ESSID, port number .....)

In 802.1X WPA
  • Select WPA WPA2
  • Authentification PSK
  • Put the username and password in EAP section

Mar 16, 2009 | Zebra QL 420 Plus Thermal Label Printer

5 Answers

Reset to default a symbol spectrum24 ap-3021

On the Symbol Spectrum24 AP-3021 and what looks like all of the Spectrum24 AP models. There is not a reset button. We only have the RS-232 serial port to work with.

Start with the power off.
Short pin 2 and pin 3 together.
Plug in the power.
Wait 15 secs.
After the two network lights become solid.
Remove whatever you used to short pins 2 and 3.
(make sure to only jumper pins 2 and 3 - if you ground against the outer shield it will not work)
Cycle the power on the unit.
The password is Symbol and it is case sensitive.

Apr 09, 2008 | Symbol Spectrum24 4131 Access Point...

1 Answer


The Access Point determines encryption. This is because the access point provides the path into the network. In infrastructure mode (all computers communicate through the access point) the AP is configured for 64- or 128-bit encryption. In 64-bit, WEP key 1 through 4 must be selected. In 128-bit, there is only one WEP key. The client computers must now be configured to the same WEP settings in order to connect to the network. If the WEP settings on a client are not correct, the client will show that it is connected to an access point, but no data can be exchanged, i.e.. no Internet browsing is possible, etc. 802.11b Ad-hoc differs only in that each computer must use identical WEP settings. There is no AP in the system to drive the WEP.

Feb 16, 2006 | Belkin (F5D6230-3) Wireless Router

Not finding what you are looking for?
Symbol Spectrum24 AP 3021 802.11b Logo

Related Topics:

532 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Computers & Internet Experts


Level 3 Expert

13434 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

75 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides