Was not running in accudry mode,run,drys timer never moves to shut off.
If it wont shut off this is a timer problem contacts fused closed,are you sure this is a new timer?(some are remanufactured)
SOURCE: whirlpool dryer: supreme Not heating up
Hi thanks for the question. the problem could be the thermal fuse located at the back . remove back panel. on the air duct . a small piece of plastic with 2 blue wires to it . replace the thermal fuse thanks .the appliance doc
SOURCE: Whirlpool Dryer
NEED A NEW TIMER NOTHING YOU CAN DO ABOUT THAT
STEVE'S APPLIANCE
516-300-3249
SOURCE: The timer doesn't work
If it is an electro-mechanical timer, then only solution is to replace same.
If it is electronically controlled, then problem is probably due to faulty board, again, it means a replacement being fitted.
Please rate my solution.
Thanks.
SOURCE: the dryer runs and drys clothes but there are
your timer sound like it stalling and replacement would be in order if if its in good shape buy one
SOURCE: Dryer not heating and timer dosen't move
A dryer runs 2 halfs (one half 120, the other 120). Sounds like you are missing the 120 that operates those two. Did you change from a four prong to a three prong?
First try cleaning the moisture sensors with rubbing alcohol,
these are two silver colored strips located inside the drier just below the
lint cleanout
280 views
Usually answered in minutes!
×