Question about Zephyr Savona ZSA-M90S Kitchen Hood

1 Answer

Replace fan/light switch zephyr pyramid range hood

Zephyr said this switch was "plug and play". i need instruction to replace switch and faceplate for 30" zephyr pyramid recirculating range hood.

thanks

Posted by gflyers on

  • Anonymous Mar 13, 2014

    replace light switch zephyr hood

  • Anonymous Feb 15, 2018

    First you need to order one from Zephyr Hoods online store:https://store.zephyronline.com/en/home
    Second, MAKE SURE TO SWITCH BRAKER OFF.
    Third: You will have to remove the vent filter so you can access your current unit, then unscrew it and pull it for replacement.
    Fourth: It is likely not plug and play, and you need to cut cables on your current unit and attach the new cables. This is a simple process compared to what is next...
    Fifth: Place the unit back in place and forget about screwing it back... INSTEAD use plumbers putty to hold it in place. Use just enough to hold it in place, as you may need to remove the unit for future repairs.

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

I am also looking for instructions for PLHV36W6CC.

The fan is on right now but the switch is sliding back and forth loosely.

I just downloaded the manual but that was no help.

If someone has a quick solution, that would be great.

Please email me at [email protected]

I have stuck my hand up and fiddled around but besides just ripping it out, could use some help.

Thanks,

Robert
www.150FastGroup.com

Posted on Aug 03, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Zephyr Savona has blue blinking light. What does that mean?

The fan light switch blinks when it is time to clean the filter. Clean the filter, then press and hold the switch for 3 seconds to reset it.
0helpful
1answer

Greetings, I have a Zephyr Pyramid range hood that is maybe 15 years old and has been a great product until recently. It is pulling very little air.

Hey.. check to see if the fan is actually spinning on its shaft under load


You may have to try to lightly hold the fan from spinning when you cut it on low..THIS IS DANGEROUS to try,, how is the fan connected to the shaft. Check it..
Aug 28, 2017 • Dryers
3helpful
1answer

I need a replacement bulb Zephyr Pyramid range hood, I cnnaot find it anywhere.

According to the "Use, Care and Installation Guide for your unit,
Replacement bulbs are available at
specialty lighting stores. Purchase type
JDR E27 50W halogen bulbs.
Or to order bulbs, please call our service
center: 888-880-8368 or online parts store:
www.zephyronline.com
0helpful
1answer

Removing existing light bulb to replace.Flush mount with nothing to grab on to

Use rubber kitchen glove to grasp bulb. Be careful not to cut yourself if bulb breaks.
0helpful
1answer
0helpful
1answer

Zephyr ep30 range hood

That green and yellow is your ground wire....wire nut that to your bare copper wire feeding the hood.
0helpful
1answer

Blower switch

if you can take it off the wall. there are holes that screws are going to go into. if the screws are not all there, then there will be noices and vibration.
0helpful
1answer

No suction

There is a set of blocks that are installed on the venting system to make the unit recirculate....use the manual to find them and make sure your not venting half outside and half into the kitchen.
0helpful
1answer

Noisy fan

MOTOR HOUSING IS CRACKED MADE OF PLASTIC
Not finding what you are looking for?
Zephyr Savona ZSA-M90S Kitchen Hood Logo

2,425 views

Ask a Question

Usually answered in minutes!

Top Zephyr Kitchen Ranges Experts

Vish Iyer
Vish Iyer

Level 2 Expert

76 Answers

Dale Copeland
Dale Copeland

Level 2 Expert

140 Answers

Are you a Zephyr Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...