Question about RCA F27450 27" TV
Try by pressing "0, 0" by remote control. If it do not changes, there is no other way with select it by universal remote control.
Posted on Feb 11, 2013
SOURCE: Cannot set Cable Default Channel
I believe you are getting mixed up between channels and programs. Normally program 00 is used for VHS as it has slightly different parameters for colour and brightness. If the TV has about 39 or more programs which can be programmed in from the on screen menu, try using program 20 for the video and 30 for the cable. For this to work you must do the on screen frequency scanning from channels 22 to 69 (UK) and select VCR, CATV, VHF, UHF, etc. I have used program 00 and 20 for two VHS recorders, working on channel 33 and 35 for example, but you must tune them to 33 and 35 on the `Tune' screwdriver hole by the aerial input sockets of the recorders. I expect if your cable unit plugs into your aerial socket of the TV that it has an adjustment for what channel it is on. The TV on screen menu may be different in some countries, so it would help if I knew where you are.
Posted on Oct 23, 2006
use vid 1 or vid 2 input on remote should do that if not then use a differ code in your universl for your tv that makes it work or type 00 should get u there another way go to channel 1 and then down arrow it will go into it if not go into your add channel menu and add them then down arrow
Posted on Dec 03, 2008
try putting the tv on channel 00, that is where this tv apparently shows the input from at least one on the video channels.
Posted on Mar 01, 2009
Tips for a great answer:
Feb 03, 2012 | RCA Televison & Video
Oct 13, 2009 | GE 31GT660 TV
Aug 11, 2009 | RCA F20352SF TV
Mar 13, 2009 | RCA F26317 TV
Feb 11, 2009 | RCA F27252GY 27" TV
Aug 11, 2007 | RCA 27F534T TV
Oct 15, 2017 | RCA F27450 27" TV
205 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: