At first my subwoofer worked it only work for 2 weeks. the subwoofer was working and stop workin i stomped the floor and it work. then it stop working but the green light its on but it doesnt have no sound at all. whats the problem anybody could help me really would appreciated
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check your ground for your amp most of the time this is the problem i just went threw this took it out of my truck put in my girlfriends to make sure it wasnt my amp sure enough its my ground also check the remote wire
with key on engine off depress accel pedal 3 times within 5 secs. You may have to repeat the procedure several times for the reset procedure to complete. dont stomp on the pedal. Slowly depressing seems to work best.
Well how about the cord, ? may be a safty switch has stuck, preventing it from comming on. Try thumpping the sides a few times stomp it on the floor. Not real hard just enough to jolt it a bit. this may free up a stickie switch in side.This has worked for me. DFD
I had the same issue with 2 Punch p1's. The wire stripping was most likely cut where the wires are saddled against 2 bare metal "C" shaped tabs before going toward the cone and coil. This was causing the wire to ground out. I cut both wires and **** connected them and bypassed the factory bracket. They work fine now. This is a poor desogn from Rockford and I can see where it might happen numerous times.