Can some help me how to change this Pick up Roller for BrotherjamIntellifax-4100e Fax Machine Im contantly getting i tried to clean the roller . I took off all the screws but I can't take the cover off.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
theres a flat rubber seperator it has a springy metal backing on it, on the part that opens up on the feeder that is probably worn out.
Best way is to replace it ...its a cheap part. you can clean it real good with alchohol, and it may work better for a while but the part should be replaced.it applies pressure to the roller and seperated the second sheet from feeding
Paper Pick up Rollers get dirty or worn out with the passage of time.
Hence, require cleaning or replacement if worn out. In case you find
them dirty use
a soft, dry, lint free cloth to clean the rollers. Dont use chemicals
as they may damage the rubber and plastic. However, if needed, you can
use damp cloth or some cleaning liquid such as mild detergent of glass cleaner to damp the cloth. As you have posted your question under Panasonic KX-FL511 is would highlight the steps for it. Im Using a similar model KX-FL612
Lift the top Cover, Locate the roller and clean them.. Hope it helps! Good Luck! CreativeTECH
when the paper pick up roller is dirty, ( with the dust) the paper can not be loaded properly, to avoid this problem clean the pick up roller softly with alcohol, use a brush you msut touch the entire surface of the roller, do not forget the separation pad clean it,
The machine is set with the sleep mode as a default. The fax part can be changed to recieve a fax by pressing the fax mode button. Press it until it says Fax only, not F/T. F/T means Fax/Telephone. This mode would make it to where you have to pick up the reciever and press start when a fax comes in. The Fax only mode means it will pick up everytime a fax comes in automatically. Let me know if this was helpful. Please give my helping a rating. Thanks!
8/10 its normally due to the Pick up Roller, There should be a arm and a Spring which allows the rollers to spring back. Turn the machine on its back and see if they are there? This will always cause it to jam and the roller will not return.
Replacing the roller can be prety extensive work. Try to check and make that the pick-up roller on the bottom is flat across sometimes it can get turns backwards and it has a round side that will not grasp the paper. If this is ture just take your finger and push the roller forwards. You can alo take a clean wipe and wipe off all of the rollers the rollers are made to be a little tacky when they start to get a little older dust can build up on them causing them not to grab the paper