Where can I purchase an ac charger for stanley series 1m spotlight

To take the charge the inbuilt battery must be functional. Once the battery goes bad you will be unable to charge the unit or it will take a small charge and die rapidly thereafter.

You may or may not be able to change the battery. It depends on the manufacturer of the product so you should consult the instructions that came with the item if you still have them.

http://gethuman.com/phone-number/Stanley-Tools
Phone Number

800-262-2161

• Talk to a Human Press 2 then 4
  

• Call Time Average Wait: 10 mins - 8am - 5:30pm EST Monday ?€" Friday
  

STANLEY Hand Tools
Stanley Tools US Stanley Tools Canada 800-262-2161
8am - 5:30pm EST Monday - Friday 800-463-9872
8am - 4:30pm EST Monday - Friday

replace the bulb

is the charger working?

Try
StanleyTools.com or Google Stanley Tools.

it sounds like faulty trigger take back and change it, Dennis

The short answer is "The tip should be set to positive (+).

I found an old Vector VEC127Y Spotlight. It appeared to be in perfect condition but the battery was dead and there was no charger. I was able to buy a replacement battery at BatteriesPlus for $21 USD. Here is the link for the battery
REPLACEMENT VECTOR VEC127Y BATTERY
I also purchased a Universal A/C adapter to use as a charger at BatteriesPlus for $17 USD. Their site does not list it yet but here is the manufacturers link. Please note the original battery was rated 6Ah. The replacement is only rated for 5Ah. Which means one less Amp hour (Ah). Which means a shorter run time, after charging, than the original battery had. Otherwise they are equal.
UNIVERSAL AC ADAPTER
I installed the new battery. I set the AC Adapter to 6V and installed the largest of the seven adapter tips that came with the charger, with TIP set to be positive (+). I opened the battery compartment of the spotlight and disconnected both the red (positive +) and black (negative -) battery leads from the battery. I then plugged the adapter tip of the Universal AC Adapter into the spotlight and plugged the AC Adapter plug to a power outlet. With a multimeter I tested the polarity of the spotlight battery leads while charging. I was able to confirm that the Adapter TIP should be set to positive (+). After reconnecting the spotlight battery leads and setting the AC Adapter to charge, I have a perfectly great spotlight in full working order.

BELKIN MAKES A UNIVERSAL AC/DC CHARGER WITH WORKS VERY WELL. MODLE F3A114 - ALSO RADIO SHACK MAKES UNIVERSAL CHARGERS AND THERE REASONABLY PRICED. IT LOOK LIKES BLACK AND DECKER BOUGHT OUT VECTOR, AND IS HANDLING THERE SALES. HOPE THIS HELPS! MATTHEW

10-12 hours for 120v AC charger, I do not recommend using a DC car charger to charge the battery. You can purchase a replacement AC charger from Black and Decker, they service Vector products. here is the link;
http://www.dewaltservicenet.com/servicenet_home.aspx?AspxAutoDetectCookieSupport=1