I forget Bios Password.What i do? - Toshiba Tecra A8-EZ8311 Notebook

1. Shutdown your server.
2. Go inside the server, and remove the CMOS battery. It should look like this.

3. Be sure to power down your server before taking it out. Be aware that once you take this out the system will forget a lot of it's time settings. This is the battery that keeps the computer's memory of time, date, and BIOS password when it's shutdown.

Forgot Bios password?

Well,I know some methods to reset bios password.
1. The best and easiest method: Close OS and shut down the electricity power of computer. Open your computer box, take out the cmos battery from the mainboard. Then the bios password will be reset to blank. Put it back after a few minutes.

2. Use the bios password recovery tool from biospasswordrecovery.com!

So these my suggest for u. Hope it helps.

There are several web sites pertaining to be able to get you into your laptop/PC if you forget your password.
Personally, I find it hard to believe that a person can forget a password as important as that and in my experience most forgotten passwords were not forgotten at all but people aquiring the equipment without the password however, try this link:

http://www.fixya.com/support/r5393255-windows_password_recovery

Reset HP / Dell BIOS Password

The password to by-pass bios password are these, hope they will hope you, once you enter BIOS using these passwords you can reset it to normal
Phoenix Backdoor BIOS Passwords:

• BIOS
• CMOS
• phoenix
• PHOENIX

how can i reset CMOS/BIOS password for HP compaq tc4400 laptop i have hp 500 notebook and i forget cmos/bios password . i remove cmos battery . but dont solve it . how can i solve it

I have a wipro wivnb7b1600 notebook & I don't know my bios setup password.
Can you help me? Hope your password send you to my mail

Thanks!!
Your Faithfuly moon

email: [email protected]

http://www.tech-faq.com/reset-bios-password.shtml

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00530488/c00530488.pdf?jumpid=reg_R1002_USEN

Chapter 1.2

Looks like you'll need access to an authorized service provider.

for bios password remove bios cell or clear bios by jumper setting changing.
for logon password start pc with safe mode.and remove the password