My mp3 is not connecting to the computer - i-Bulldog IMP-90 MP3 Player

MP3 players connects to a computer using an USB cable.
When connected the computer will see the MP3 player as an external storage device.
This allows you to copy files from the computer to the MP3 player and it will also allow the computer to read files off the MP3 player. Therefore you can select and play video files from the MP3 player on your computer monitor.

at my experience the mp3 player if connect to computer will at charging mode and at windows explorer will detect as removable disk like pen drive

at this state you can copy/paste file from computer to mp3 player or from mp3 player to computer
if your computer did not detect mp3 player as removable disk it mean your need to install mp3 player driver to your computer first

If you want connect you MP3 player to the computer - Use USB cable, connect to the Computer USB port, and another connect to your MP3 player - If you connect your computer automatically show within 4-5 second running to your computer. If run directly open Folder, If not running go to my computer and go to Removable Disk - then open and Share your mp3 or Data.

Did you run the installation CD before you plugged the mp3 player into the computer? If not, disconnect the mp3 player from computer, uninstall all the Sansa software on your computer, and reinstall the software from the installation CD.

If the uninstall/reinstall fails, update the firmware on the player from Sandisk's website.

Good luck!

-Tha Mp3 Doctor

This would indicate to me that your MP3 Player might be bad. Have you tried to connect your MP3 player to another computer to see if it works on that computer?

Good luck.

Try connecting your creative mp3 player in different usb slots of your computer. Or try connecting it on different computer.

Check your connection settings on MP3 player.

Hi, When i connect my sansa e200 mp3 player with my computer..it showing CONNECTED on the mp3 player screen, but does not show any disk drive in my computer. No problem with computer, my pen drive is working fine with it. can someone help?

i have windows xp in my pc still my av10 is not being detected and its no turning on can u give any solution

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.