Question about KitchenAid Kitchen Aid KP26M1X 6 Quart Professional 600 Series Mixer
My wife was mixing bread, seemed to overheat and stop working. Won't turn on. Smoke came up after it stopped, not a lot, but enough that I'm pretty sure the motor is burned up.
Bread is very tuff on mixers. always buy the strongest mixer that you can afford. im guessing the field in the motor fried.
Posted on Feb 08, 2013
SOURCE: kitchenaid mixer 45ss
I dont know much about them but If you cannot get it repaired I do have a lift bowl stand mixer that I bought without the bowl or attachments that I would sell for $80.00 Or I will buy your attachments. Thanks, Mark.
Posted on Mar 23, 2009
The Professional 600 has a metal gear housing with a metal gearing. Because of this, the Professional 600 will generally run louder than other stand mixers that may have a nylon/metal mesh gearing.
How long is the bread dough being mixed for? Kitchenaid stand mixers must be used on speed 2 for bread doughs, using the spiral shaped dough hook, and mixing for no longer than 7 minutes.
If the flat beater is getting caught on the bottom of the bowl, pleasure assure the bowl is being seated correctly. You will place the bowl on the mixer arms on the left and right hand side. You will also want to take your fingers along the back of the bowl, where it butts up against the base of the mixer, and press downward. You will hear an audible click as the bowl falls into a spring latch and allows the bowl to sit flush and secure. If this is not being done, the flat beater may strike the bottom of the bowl.
If this was not the cause of the problem, please consult your Use and Care Guide about the beater to bowl adjustment. This is an easy adjustment made with a flat head screwdriver that can quickly correct the problem of a flat beater hitting the bottom of the bowl.
Posted on Jul 08, 2009
SOURCE: Kitchenaid Mixer will not lock
This sounds like an issue of beater to bowl adjustment, which can come out of alignment naturally over time and with use of the machine.
If the flat beater is striking the bottom of your bowl, this may cause the locking mechanism to loosen and may cause the mixing head to "bounce" during use.
Your Use and Care Guide will cover the "beater to bowl adjustment," which you can do at home in a few minutes with a flathead screwdriver.
Hope this helps!
Posted on Jul 08, 2009
Tips for a great answer:
Mar 11, 2013 | KitchenAid 32685 Mixer
Mar 02, 2013 | KitchenAid K5SS Heavy Duty Commercial...
Dec 15, 2012 | KitchenAid KP2671 Professional 6 Series...
Aug 01, 2011 | KitchenAid K45SS Classic Stand Mixer
Oct 08, 2009 | KitchenAid KT2651X Epicurean Stand Mixer
Oct 01, 2009 | KitchenAid Food Mixers
Jun 24, 2009 | KitchenAid Food Mixers
Jun 07, 2009 | KitchenAid K45SS Classic Stand Mixer
Jan 31, 2009 | KitchenAid KP2671 Professional 6 Series...
Oct 29, 2007 | KitchenAid K5SS Heavy Duty Commercial...
Oct 17, 2019 | Food Mixers
596 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: