When I try to load WinTv from the icon on desktop or from the list of programmes I get message WinTv Initialisation error hTV=0 Cannot seem to get around it. Using it to copy analogue video tapes to hard disc

Which software are you using please give the version

Generally, there is no icon on the desk top. To check-Go to control panel and click on add/remove programmes. Go through the list. Adobe flash player should be there on top of the list as it starts with 'A'. If it is not there the programme has not been downloaded. Re down load it

I think this is a hardware or driver problem.

This might help, it's the guide to hunting down the 2 usuall problems:

http://www.hauppauge.com/pages/faq/support_faq_pvrusb2.html#4

if after checking these this isn't the problem, come back and ill try and diagnose it again.

Okay, Media center does not work with some Wintv HVR's yet it will work with the software it came with and sometimes media center will use the wintv software to make it work but its sketchy. If you want a more media center compatiable card look at www.microsoft.com website they have a list of media center compatable Tv tuner cards, Trust me I am having the same problem with my tuner card now and its not wintv its a RCA and its under windows 7 this is just the thing here not all card work with media center.

Thanks for using fixya.com please do click the accept button.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

HP only supports XP if using vista
so does Hauppauge WinTV-PVR-pci don't support vista

yes if do a restore

it will wipe all your files and data off the disk an be gone forever

please back up your data before you do a restore

Everyone, I have found the solution to this. The simple thing is this game was never made to run on Windows Vista or above.

You can fix this easily though - go to your desktop and you should see the Bad Boys II launcher, right click and then go to properties. Then click on the compatibility tab and tick the box that says "Run this program in compatibility mode" and choose Windows XP.

Problem solved, if you want to thank me visit, daily-porn.co.uk to make some easy money.

try sage tv or beyond tv software

From the Hauppauge website:

Error Messages when attempting to run WinTV32 or WinTV2000: Error messages such as: "Error. Cannot locate capture filter", "Cannot build filtergraph", "Error connecting Vcap and HCWCap filters", "Error connecting preview pin" can be caused by bad driver installations. Run the latest driver on the Hauppauge WinTV-USB technical support page to fix this. This new driver runs HCWCLEAR first, and then automatically reinstalls the driver.
Aternatively you may receive an 'Initialization error HTV=## '. Please look in the Device manager to see if the Hauppauge WinTV USB is listed correctly in the Device Manager. If it is not listed properly or if it has a Yellow mark on it, the drivers should be reinstalled.
Also, look under Universal Serial Bus controllers in Device Manager and be sure that the "Universal serial bus controller" is listed correctly(not disabled) as well as the USB root hub. If disabled, re-enable, and reboot.

the plug ins that it relates to can only be other programmes that are associated with the network for example windows zero configuration. I would suggest going to my computer, right click>properties>hardware tab>device manager and look in the list for network adapters and on the '+' sign right click on your wireless network card and select uninstal. Restart pc and it should be installed automatically, but keep your eye on the taskbar when it says found new hardware and ensure that it says it has found the intel pro wireless( if thats the model) and try again. Also re install the drivers from your notebooks web site incase there are updated ones.