Auto shutdown i have Hp pavilion a1120n, my problem is when i tuen on my pc it automatic shutdown i dont know why? i thought its may be the power suply, i change the power suply but still i have the same problem... if some body wht should i do now plz let now [email protected] Thx

If you cannot change the screen resolution then most likely the wrong video driver was installed.
Check the make and model of the graphics card and install the driver.

check whether you have all cables connected,and if problems persists slide your pc holder at the left of your sight,and near the motherboard clean the dust and dry powering it on,,

your's caringly,
shoeb

thank you for using fixya!
and dont hesitate to ask me,

The maximum upgrade would be a 3.4 Ghz CPU, you would not see any difference in day to day use.
Your max memory is 4GB, if you are using 1GB or less, you would see a big difference upgrading to the max.
A hard drive upgrade may also see some benefits.
Some info for you here ...
http://h10025.www1.hp.com/ewfrf/wc/document?dlc=en&lc=en&product=472139&cc=us&docname=c00361570

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07139&lc=en&dlc=en&cc=us&product=472139&lang=en

If the battery is full and still shuts down suddenly then it could be a heatsinking problem on your Notebook. Also try unchecking the option "Automatically Restart" from StartUp & Recovery section in System Properties.

You can try to access the recovery partition of your Hard Drive by performing the following task:

Turn off your computer
Power on the computer
Start tapping the F10 key on your keyboard
It will bring up the PC doctor recovery screen
Select the option to restore computer to original factory settings

If you face any kind of problem in accessing the recovery partition, please let me know, I will give you a direct number and link from where you can order the recovery discs.

Please let me know if you find this solution helpful.

Don't forget to leave your comments and ratings.

Thank you for choosing Fixya

Yes it needs a power supply. You can get a cheep one on eaby or get one off of the HP site

Hope this works,

Luke Wilcox

This would mean that autostart is not turned on many programs will turn this on for you like Apples iTunes.

You can turn it off using TweakUI powertool if you use WinXP Home, howeverthe best way is to use a reg tweak to turn it ON however I suggest that you keep it OFF for normal use;

Click Start, Run and enter REGEDIT Then go to:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer
Create a new value called: NoDriveTypeAutoRun
Type is: DWORD
Value is: 0x000000b1 (177)


If you use WinXP Professional and feel up to changinf your templates you can enter the Group Policy window.

You should select Administrative Templates \ System in the tree view: You will see an item in the right side pane called “Turn off Autoplay”


Double click the item, and set the radio button to Enabled, and change the “Turn off Autoplay on” to All Drives.

start menu->programs->YouCam or look in to ur Desktop u will see an Icon named YouCam, just double click it and use it, by the way the Features in YouCam software ROCKSSSSSSSS loooooooool

try the new memory one by one and the memory should be PC2 3200 MB/sec and DDR2 SDRAM and as there r 4 slots try diffrent slots also

You are confusing Hibernation, where the RAM is written to the HDD and power is turned off without unloading the OS, with Screen saver (control panel - display).