Question about Video Game Consoles & Games

2 Answers

How hdd connect with slim ps2

Hi my name is vicky and i have slim ps2 model no. scph 70006 my set is now 2 year old my problem is that i am not able to access the gaming dvd from laser inside the game can i connect a hdd with my slim set and if yes then how ?

Posted by vijay_dhi670 on

Ad

2 Answers

Derek Powers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 132 Answers

You cannot connect a usb hardrive or anything for that matter unless you "soft mod" the ps2 you need a pro action repaly and the usb stick that comes with it and you need to put certain installtion files on the stick with your computer.

Google: "Mod slim ps2 to play backups"

Posted on Feb 05, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi my name is vicky and i have slim ps2 model no. scph 70006 my set is now 2 year old my problem is that i am not able to access the gaming dvd from laser inside the game can i connect a hdd with my slim set and if yes then how ?

Posted on Oct 09, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ps2 freezing games


I was experiencing the same problem on my ps2 slim scph-90004. When I put a game in my ps2 it loads but after some time it just freezes at the same spot.I went to many shops but they dont recognize my problem.Then i open my ps2 slim (Warning:Opening of ps2 my void your warranty) and saw the lens which was not adjusted. SO,if you are experiencing the same problem then use the above method(For slim only).Look at the rod near the lens which has two small clips on it. Open the screws on the clips and take out your ps2 lens.Clean it with a cotton.Set the lens in some different position and load your games .

Apr 20, 2013 | Sony PlayStation 2 (PS2) Console

2 Answers

How to boot the ps2


You press the button in the picture.chsinganswrs.jpg

Mar 04, 2011 | Sony PlayStation 2 Slimline Console

1 Answer

Playstation 2 is 2 years old. Will not read game discs or DVD's. Any suggestions???


  • Excellent optics but won't to read.
  1. Check the mecanic gear.
  2. If you have SCPH - 3000 series, check the IC Driver (BA 5815).
  3. If you have SCPH - 5000 series, check the IC Driver (LA 6508).
  4. Check the ModChip.
  5. Check the IC SP 3727.
  6. Check the resistor (in 220 block), between IC Servo Master Control & IC Interface (CXD 9611 BR).
  7. Check the transistor (in socket optics= pin 6).

Sep 18, 2010 | Sony PlayStation 2 (PS2) Console

1 Answer

Playstation 2 won't play DVDs


if it's a fat PS2 and
model SCPH 30001, SCPH 35001
(not including the models with an 'R' after the model #.

these models need the following to play DVDs:
- PS2 DVD remote with IR unit
- PS2 DVD disc player (sold with DVD remote w/ IR unit)
- PS2 memory card

you copied the DVD disc to the memory card. you used the memory card to play DVDs.

later models didn't need the memory card to play DVDs.

hope this helps :D

Jul 16, 2009 | Sony PlayStation 2 (PS2) Console

1 Answer

Ps2 slim scph-75001 starts to read the games but then stops!


your lense is more than likely defragmented jacob and you should never take any system apart okay so what you wanna do is if your warrenty is still in effect dont tell sony you took it apart just send it in for a refurbisment if it isnt you need to look around online for a ps2 slim lense okay

Mar 08, 2009 | Sony PlayStation 2 (PS2) Console

1 Answer

Which multitap do I buy?


There were two versions of the multi-tap made; one for the original fat PS2 and a smaller version made for the slim. The two versions are incompatible with the other PS2. If you have the original multi-tap connected to the slim, it should throw out the 'controller disconnected' message when you boot up. The slim version of the multi-tap should have a sticker on the bottom saying 'only works with models SCPH-70000, SCPH-75001, SCPH-75002'.

Other than the sports games, I don't recall any titles that allow more than two players anyway.

Nov 25, 2008 | Sony PlayStation 2 (PS2) Console

2 Answers

PS2 Modded Trouble Reading DVDr's


Your DVD potentiometer pot on the back of the PS2 laser lens needs to be readjusted. Some people will try to tell you it's out of alignment but if that was the case it would not read CD's. Some people will try to tell you the laser lens is bad. If that was the case it would not read CD's. On the back of the laser lens are two potentiometer pots. In english? Two lil screws that are turnable. One controls the power of the DVD laser one controls the power of the CD laser.

http://www.cyber-mag.com/station/laserV9.htm

That link will give you pretty lil pictures of what i'm talking about :)

In a nut shell the story goes like this folks. If your PS2 won't read certain game DVD's that are of a certain color or if it all of a sudden mysteriously fails to read games it once read but will play cd's just fine, the voltage of the laser for DVD's is not set correctly. (this does needs manual tweeking from time to time if you take your ps2 and move it around alot or if you take it over to friends houses etc etc. Basicly alot of movment in general can take this out of alignment. Even keeping the PS2 on it's side could theoreticly (just my opinion) based on gravitational pull, unbalance the potentiometer.

RESOLUTION:

Step 1 identify your PS2 version:


Version 1 - SCPH-30001, 10 screws on bottom of case, serial no. starts with "U1"
Version 2 - SCPH-30001, 10 screws on bottom of case, serial no. starts with "U0"
Version 3 - SCPH-30001, 10 screws on bottom of case, serial no. starts with "U2"
Version 4 - SCPH-30000, 30001, 35001, 30002, 35002, 30003, 35003, 30004, or 35004, 8 screws on bottom of case

NOTE: Version 4 has 2 varieties of motherboard: Gap/No Gap, the difference between v4 "Gap" and v4 "No Gap" is the "Gap" is there's a spot in the center of bios chip where each side lacks solder points.

Version 5 - SCPH-30000R, 30001R, 30002R, 30003R, 30004R, or 30006R. Also, some SCPH-30000, 30001, 30002, 30003, and 30004 models have a V5/V6

NOTE: Version 5 & 6 - the difference between these two versions is one of the connectors in the corner.

Version 7 - SCPH-39000, 39001, 39002, 39003, 39004, 39008 or 37000
Version 8 - Only in Japanese consoles. SCPH-39000, or, SCPH-39006 (GH-022 BIOS 090)
Version 9 - if you have SCPH-50000, 50001, 50002, 50003, 50004, 50006, or 50007 you have a v9 or v10 board.
Version 10 - SCPH-5000x, with date code "3D" to the right and below the serial number on the back of the console. (GH-026 board)

NOTE: To know if its a v9/v10 start up PS2 with no game in it ,press triangle and check dvd driver version dvd ver 3.00 = v9 & dvd ver 3.02 = v10.

If your model # is SCPH-50000, 50001, 50002, 50003 or 50004 AND if you can find a small ''a'' under the SCPH number or have DATECODE "3C" you have a V9 PS2 main board. (GH-026 board).

If your model # is SCPH-50000, 50001, 50002, 50003 or 50004 AND if you can find DATE CODE "3D" as shown below, you have a V10 PS2 main board. (GH-026 board).

Version 12 - The new slimline PS2 consoles are referred to as PSTwo here, but elsewhere they are also known as "v12" units... their numbers are SCPH-70011/SCPH-70012, and also SCPH-70004 CB (Belgium).

Step 2 use either google or the link above. If you're using google your keyword search will be something like "ps2 v12 laser lens adjustment" *replace v12 with your ps2 model.

In either case navigate to the site and follow instructions to set the pots back to their factory default settings.

Oct 11, 2008 | Sony PlayStation 2 (PS2) Console

2 Answers

Disk read error on slim ps2 scph 75003


hello pauldonp...if this is an early version of the slimline they had a problem with over voltage which inturn took out the laser.your only option may be to replace the laser . sony did bring out a mod for this..i preferr the real old version of the ps2 as they had all separate boards and if one went faulty you didnot have to replace the lot ,also the lasers were a lot cheaper than the later models .in the slim lines the lasers are not all that expensive .they do take a bit of setting up as you have to know the ohms setting on the laser for each model..hope this helps

Feb 08, 2008 | Sony PlayStation 2 Slimline Console

Not finding what you are looking for?
Video Game Consoles & Games Logo

Related Topics:

1,560 people viewed this question

Ask a Question

Usually answered in minutes!

Top Video Game Consoles & Games Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18438 Answers

Are you a Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...