How do i take apart a daisy 901 powerline

It is usually just O-ring seals that need replacing.

https://www.google.com/search?q=daisy+powerline+5170+parts+diagram

..

Question edited for clarity.
Question moved to a Daisy Powerline category.

You need a seal kit. Videos to overhaul in the link.

https://www.google.com/search?q=daisy+powerline+990+dual+power+seal+kit

..

http://forum.daisymuseum.com/daisy-powerline-880-wont-build-pressure_topic7525.html


http://forum.daisymuseum.com/daisy-powerline-880-wont-build-pressure_topic7525.html

Go to http://www.daisy.com/node/103, click on downloads. Link for printable/downloadable owners manual for Daisy 901 will come up.

Not sure what model you have but try this. Hopefully this will help. http://www.crosman.com/pdf/manuals/B392-OM1.pdf

Try oiling the cup with air impact wrench non-fluid oil or 3 in oil

oil the air cylinder , thats most likely your problem

Daisy Powerline 856 Manual

http://www.ebay.com/itm/Daisy-856-860-Rebuild-Reseal-Kit-Seal-Gun-BB-Air-Rifle-Set-O-Rings-Parts-Seals-/152432029624


https://thefiringline.com/forums/showthread.php?t=86965

COMMENT Federal Regulation of BB Guns Aiming to Protect Our Children

You might enquire about a product recall for the 856 but the original page referring to the recall has been removed. [email protected]

Or you could try contacting Daisy and see if they retain any information about any modification (but they are unlikely to have any parts for it, now.) The problem was that the earlier design of the 856 and 880 allowed a pellet to be lodged in the mechanism, unknown to the shooter. This could result in inaccuracy during firing. The 856 was modified to single shot rather than magazine by 2001 at which time Daisy was not found culpable in several deaths (resulting from direct firing at a party). I retrieved the findings using the Wayback Machine at the Internet Archive. The US Government site has removed the findings for some reason.

Look around the stock for a retaining bolt under the cheek guard.

Not the 008 powerline the 901, i have the same problem