How to reset tv after replacing xl 2400 - Sony (XL-2400) Projector Lamp for KDF-E42A10, KDF-E50A10

Hi,

Lamp Access door for Sony KF50WE610 is below the screen on the front of the TV. This page shows location of Lamp access door and DIY bulb change instructions for most SONY LCD TVs:

DIY Bulb Installation Guide

XL-2000 XL-2100 XL-2200

XL-2400 XL-2500 XL-5000

XL-5100 XL-5200 XL-5300

This page shows Lamps and bulbs for all Sony LCD Projection TVs

Sony Lamp Gallery

Look at Optical Engine Faults before buying a lamp or bulb. Replacement bulb will not repair these problems.

I have this exact same problem. I even put the old lamp back in to see if it was the new lamp and the same fuzzy orange/redish hue was still there.

Cause of darker picture is lamp that has reached at end of its working life span and need to be replaced for brighter picture in tv.
Replace lamp in tv to get problem solved.
Thanks.

i wanted know myself

hello make sure the lamp and the cover is fitted securely, when you've done this the tv should be ok

shaun

I change the lamp 4 my tv sony vega XL-2400 and I steel send me a signal to change the lamp what can I do 4 setup.

how do I REPLACE THE LAMP IN THE kdf-42WE-655 WEGA TV. i PURCHASED THE REPLACEMENT LAMP, PART NO. XL-2100U>

Please make sure lamp cover is reinstalled securely after replacement of lamp in TV.
If lamp cover is not fixed properly, TV wont power up and red light will start blinking.

no you should only replace a bulb with the one made for that brande t.v. you should put in a sony xl-2400 in your sony t.v. and yes you should get both housing and bulb in 1 i bought mine off ebay for about 116.00$ both lamp and housing very easy to replace good luck also if you have a sony kdf-42we655 or 50we655the lamp part # is xl-21oou or xl-2100