I cant switch my 465garmin from car to truck

did you drive to dirt and see if it unsticks?
try side of road , at dirt.
first off,
no 4wd system stated, which kind.? and WHAT MODE?>???????
and if using locked mode, 4wd it not for pavement, and will do damage using locked mode, or part time 4wd on dry pavement , no ice means dry. at the least its dangerous. using locked if you dont know what you are doing, use AWD.

why are you in 4wd, do tell?
see the word CANT here.
read it and believe it.

http://en.wikibooks.org/wiki/Jeep_Liberty/Transfer_Cases


use only AWD (if you have it) on dry pavement
or as the lost operator guide told you... .lost that , even read it yet?

the operators guide lost? buy one. put it back>????????

try fsm
see it all there.
RTM read the manual

http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service


wj , its there. and free.

USE? (turn the knob? or drive?)
on what, dirt, ice, day pavement, we dont know?

lost the operators guide? already?
did you buy AWD option? we dont know that.

here is the knob of AWD, got that?
see the word lock there, that means you have AWD.
see link here to the missing opr, guide.
http://www.fixkick.com/part-time-test.html#exceptions.



the opr guide is $4 for a DAY pass.
RTM
here:
https://suzukipitstopplus.com/Products/1051-2010-grand-vitara-owners-manual.aspx

better is to buy one, and read all the warnings and dangers in it.

Getting stuck in valet mode is so annoying, but it really IS possible to reset the Security Unit (SU). Though not mentioned how in the Owner's Manual (OM), it is possible to set Programming Mode (PM) while in valet mode, even if you have lost or replaced the remote. See the OM about switching from LOCK-ON-LOCK 10 times. It takes some practice, but the horn will beep when you are in PM, at which point you can reset your (old or new) remote.

See https://pixcl.com/2005-2008-subaru-forester-stuck-in-valet-mode/ for more detailed info.

all doors there are drivers, and then OTHERS, (wiring)
its wired OR logic, so any switch grounds, it turns them on.
and is programmable on all cars. to have this on or off (features explained in the operators guide, lost that?)

CRV has 3 lamps
front dome
rear dome
and spots.
all of them are messed up? for all doors.
if yes, ITS programming. is wrong.

the rear light is directly controlled lamp to rear lamp. (hatch glass or gate switches.
and has a slide switch, off,on, auto.
the spots lamps are direct. on, or off
the front however is totally different and wired unique.
as you know the drivers door is unique, as it operates the
keys left in igntion, or head lights left on, mode. so if those work
right then the drivers door switch, is,, working......
the front dome
has 3 modes. again , off , on and auto .
Auto is the MCU , unit, the MCU sees any door open and the front dome gets input to the AUTO pin, and if in auto the lamp glows.
i dont think the MCU is programmable but do read the oper guide for that., i dont have one.

hello there
send me an email i wil send you the fuse box index
[email protected]

proporsche

• [P/A] button Performs category scan while in the SIRIUS mode.When the button is pressed and held, preset scan is performed.
• [DIRECT] buttons Stores a station into memory or recall it directly while in the SIRIUS mode.
• [ > '' ] (play/pause) button Select a category [<<] rewind, [>>] fast forward button Press the button to select a station.
• [FNC] button Press the button to switch the operation mode among the SIRIUS mode, etc.

Feature demo
The feature demo automatically starts when
power to this product is switched off while the
ignition switch is set to ACC or ON. Pressing 6
numbered button during feature demo operation
cancels the feature demo mode. Pressing 6
numbered button again to start the feature
mode. remember that if the feature demo continues
operating when the car engine is
switched off, it may drain battery power.
Notes
• You cannot cancel a demo mode when the
front panel is open.
• The red lead (ACC) of this product should be
connected to a terminal coupled with ignition
switch on/off operations. If this is not done,
the vehicle battery may be drained.

i HAVE LOST MY SEAL BLUETOOTH VISOR MANUAL AND CANNOT PAIR IT UP WITH MY NEW sAMSUNG s5230 PHONE

u will get manual online try  it