I have a 500w Turbo handheld blender and want a blade and bowl base to go with it. Which one do I need ? Thanks

do an online search using make and model or a small appliance repair shop in your area

Use the A blade and make sure whatever you are mixing the egg whites in is scrupulously free from any grease etc. Make sure the bowl is clean and dry before you use it.
Best wishes

I need a wiring diagram too don' Robot Coupe have service info. on their products as expensive as they are it's a problem. Robot Coupe MP450 Turbo can't seem to find anywhere. Thanks

I am sure they come all as one piece. To get the seal on the base of the bowl is not an easy job, and the manufacturer changed the gopal posts to avoid the problem by selling the complete unit.

Please rate my help++++Thankis for using FIXYA

UK supplier is Nesbitts

http://www.nisbets.co.uk/

not interested in your expencive plan

Look at the underside of the blade shaft. The metal wing nut on the end of the shaft secures the blade assembly to cream coloured plastic blade base. The wing nut also transmits the drive from the rubber coupling on your blender to the blade shaft. The wing nut has a LEFT HAND thread.
The left hand thread ensures the blade assembly does not unscrew during normal blender use.

Firstly disassemble the blender blade assembly. Place a folded tea towel over the blades and hold the blades firmly. If you do not use a tea towel you may cut yourself.

Grip the wing nut with your other hand and unscrew it CLOCKWISE.
Remove the wing nut. You can now remove the blade from the plastic base.

Put the blade assembly in the new jug and offer up the plastic base from under the jug so that the blade shaft protudes enough for you to install the wing nut.

Screw the wing nut ANTI-CLOCKWISE to secure the blades to the plastic base.

Do not over tighten the wing nut; you may have to replace your jug again at some point.

go to this page http://www.russell-hobbs.com/parts.shtml and order what you need directly from Russel Hobbs.

Please mark this answer as a fixya! thanks

I need a new blade aftermarket

Unplug it and with a flat head driver prise open the lid a the the top between the flex and the top cover