FI-5120c User first gets an error 20080 and then clicks OK and then error 20090 pops up. Any help?

I Hope this helps...

http://www.urbooklibrary.com/signup?b=1&ad_domain=ads.ad-center.com&ad_path=/smart_ad/display&ref=5024505&q=Intel%20Error%2020080%20Operating%20Systems%20Problems%20Amp%20Solutions&sid=105&bt=1420165905233&bh=1882248291

Internet pop-ups can be an annoyance. These windows are usually associated with different forms of advertisements and at times can include viruses that can infect the computer. Pop-ups do not have to be a part of computer use if the user does not desire this distraction. There are ways to stop pop-ups and prevent them from appearing unless desired. Pop-up blocker allows the user to block these items and select which items to allow.

Open Internet Explorer. Click "Tools" from the menu bar. Tools can be found on the bar that lists "File, Edit, View, Favorites, Tools, Help" directly beneath the address bar. Click "Internet Options" from the "Tools" menu. Click the "Privacy" tab in the "Internet Options" box. Click to check the box that says "Turn on pop-up blocker" in the "Pop-up Blocker" section of the menu. Click "Apply" to save changes. Click "OK" to close the "Internet Options" box. The computer will now block all pop-ups from websites. If downloading items from the Web, the computer will ask whether you would like to allow these items to be opened.

Windows Vista or Windows 7 users may experience a Printer Error 5 when attempting to print from your MYOB software.
To overcome this issue, turn OFF the User Account Control (UAC) in Windows. See below for instructions.
Note: Our support note Printer error messages, definitions, and solutions can be used if you are not using Windows Vista or Windows 7 and are receiving a Printer Error #5.

To turn off UAC in Windows Vista

-Close out of your software.
-Click the Windows Start button and choose Control Panel.
-In Windows Vista click User Accounts and Family Safety.
-Click User Accounts. You may need to select a User Account, if so, choose any account.
-Click Turn User Account Control on or off.
-You will be prompted with a window entitled Windows needs your permission to continue. Click Continue to this message. If you are not setup as an Administrator user on this machine, you may be prompted to enter a Administrator Username and password.
-Deselect the option Use User Account Control (UAC) to help protect your computer then click OK.
-You will be prompted to restart your computer. Click Restart Now.
-You may get a warning to Check your computer security. This is a standard message that Windows recommends User Account Control to be always turned on.


To turn off UAC in Windows 7

-Close out of your software.
-Click the Windows Start button and choose Control Panel.
-Click User Accounts.
-Click Change User Account Control settings.
-Click and drag the slider to the lowest position, in other words Never notify.
-Click OK.
-Restart your computer to complete this change.

This is definitely an error of some sort

the pc is looking for the driver of the program,if you have the program disc ,reloading will clear off the message, but if no disc,go to control panel,open =load,remove icom go down list til you find program, then remove

Just try this trick maybe it works for you : Go to Control Panel Click User Accounts and turn-off User Account Control,then click ok to restart your computer.Start an Office program, accept the EULA, restart an Office program to make sure EULA doesn't pop-up, go back to User Accounts
and turn User Account Control on, then click ok to restart your computer once again.BTW are you using vista?

Hi,

Apparently, you computer has some unexpected software running during the startup. In order to get ride of these software, you could check your register table manualy by regedit or download this software, which will help you to find if there are any suspect software running at the startup.

files.filefront.com/sreng2zip/;8049311;/fileinfo.html

Tap the f8 key when you restart, and choose safe mode, click the ADMIN account, click "Yes", and then click "Start", Control Panel, If you do not see 20-30 icons, click "Classic View" on the left hand side of the window, Click Programs and features, Check the box at the top to show updates, and try unistalling the updates if that doesn't work, repaet the above steps, but Click "NO" after you click the admin account, and it will goto system restore, and choose a date and time or "Checkpoint" when the PC was running right.
Please rate this a fixya if it helps,
Thanks
Gomez

Fixya does not sell power supplies.

what is the internal error message, (error 500?)

and im assuming you're using the disc

take that thing out and click on start, run, type cmd and click ok

black window pops open

type ipconfig and see what your gateway is

it should be 192.168.1.1

if default gateway is blank

type ipconfig /release (there is a space between ipconfig and the / mark)

ipconfig /renew (there is a space between ipconfig and the / mark agian)

type ipconfig again, if still no gateway

click start, control panel, net work connections, right click your local area connection and click properties.
In the window where its talking about client for microsoft networks, double click the bottom line that says internet protocol TCP/IP

in the window that pops open, make sure you have the box marked by 'Obtain an IP address Automatically',

and press ok and ok again.

ping 192.168.1.1

if you get a
reply a;ljf;alsjf;aslkdfja;
reply alsdjfalsjfd;asljdfk
reply lasjkdfal;sjfds;lfj
reply alskfjalsjf

(4 replys)
then your computer sees the router

if you get back a message that host is unreachable, you can check to see that your nic is ok by typing
netsh diag gui
and clicking ok
a help and support window opens eventually

click 'scan your system'
when its done, look down at the bottom at modems and network adaptors

at the right, if its blank or fail, is bad
if pass, then you need to maybe try new ethernet cable, and or reset the router

also, try to set it up in safe mode, a firewall may be blocking you

click on start, run, type msconfig and click ok
a system configuration utilities window opens
click on the boot.ini tab
put a mark by network
move 2 to teh righr and put a mark by network
drop down and click apply and move left and click close
restart the computer
it will come up in safemode
click on your user account and click ya when it asks
do you want to run in safe mode

when you in safe mode, open internet explorer and type 192.168.1.1 and see if you can access the router
the username and password are both admin

if you have DSL, set it up for PPPoE on the basic set up tab and put in your username (your email address like [email protected]) and your password)

click save changes at the bottom and continue
click the status tab and if it says connect, click it
if it says disconnect, leave it alone and open antoher internet explorer window and go to yahoo.com to see if you online

if you are, click start, run, type msconfig and click ok
when the window comes open, click on the boot.ini tab again and unmark safeboot, click apply and close and restart the comptuer to get back to regular mode.

hope this helps alittle

spin

.
then yor

spin