Question about Apple iPod nano

1 Answer

DRIVERS USB CONEKT TO COMPUTER

Posted by Manj on

Ad

1 Answer

Brian Sullivan

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Apple Master
  • 27,725 Answers

Click start control panel administration tools computer management device manager scroll through all of your devices If you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver If you computer came with a motherboard disk the drivers could be on it. Rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html Windows XP/Vista/7/8
it might take some time being a freeware driver solution Note: it will find all of your outdated drivers
This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point.

Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated

Posted on Jan 31, 2013

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a manual ther shows hauv to conekt the cabels right


Hi henrikstaxa ,


It's really the best idea to take help from the manual to know how to connect devices on the motherboard.


Please download the complete manual from this link :- http://bit.ly/kO4KwT


Hope this helps ..:) Your feedback would be appreciated.

May 17, 2011 | ASUS P5VDC-MX Motherboard

2 Answers

Cant conekt to enternet


You cant get facebook on a DSI

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Jul 22, 2010 | Nintendo DSi Black Console

1 Answer

Power hub usb problem . compaq laptop evo n1020v. do i need to update the bios?


Please uninstall all the USB Drivers from the Device Manager and then restart the Computer. The USB Drivers are Operating System generic Drivers. The Computer will reinstall the Drivers for USB automatically

Jun 30, 2010 | Compaq Evo N1020V Notebook

1 Answer

Solution CD for Iomega Network Hard drive 250Gb


You get the drivers at Iomega.com and look under support to get your drivers.

REMEMBER you need to install those drivers to ONE pc and then have all your computers networked to it thru your network neighborhood. Any other questions, please write back to me, ok?

Mar 16, 2010 | Iomega 33089 250 GB Hard Drive

1 Answer

Schemat audio front panel conekt


Here is the link for the manual. It will show the jumpers and pins for sending to the back and front. USB, sound, etc.

http://english.gigabyte.ru/products/mb/manual/ga-ma69vm-s2_10.html

Good Luck

Dec 17, 2009 | Gigabyte GA-MA69VM-S2 (rev. 1.0)...

1 Answer

I need to conekt my chassis cabels to a P5B-VM asus motherboard :/ cant fina anny manual to this


Diagram of Mother Board

Please see the above link. In the top right corner of the board you will see CHA_FAN. However you could also plug it into the PWR_FAN located more in the top left of the diagram.

Nov 10, 2009 | ASUS P5B-VM Motherboard

1 Answer

The computer recognizes the hardware, however scanner is not scanning. Have windows XP. How can I tell if the scanner is broken, there are no lights on it?


your scanner is ok.
But there is communication problem from computer to scanner .
For that
Check your usb cxable and usb port of computer working fine.
Try in another usb port.
If you have other port like parallel port then check it.
Check drivers of scanner are instaled proeprly.
Ig already installed then uninstall it and install again.
Also uninstall all usb drivers then restart the computer then it automatic install usb drivers .
you can uninstall usb drivers from computer with device manager.
Press windows key + Pause break key to see system proeprty then go to hardware then you see device manager then uninstall all usb drivers.

Jul 31, 2009 | Syscan TravelScan 662

Not finding what you are looking for?
Apple iPod nano Logo

1,166 views

Ask a Question

Usually answered in minutes!

Top Apple Audio Players & Recorders Experts

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Jean Sintulaire

Level 3 Expert

759 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

76 Answers

Are you an Apple Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...