Lost remote for jamo dmr 61

What type of disc are you trying to format? DVD-Rs that have already been finalised will be read-only. You don't need to format DVD-RAMs, just erase what's on them and re-record.

Dear Sir,
I want to connect my JAMO DMR 61 receiver (5.1 channel) with my LG TV. My LG TV is connected by set of box. I want my TV sound to come in through 5.1 channel speakers. Please please guide me. I am totally blank.
Please write me at [email protected]

There are no official (or unofficial) universal remote codes for Jamo DVD players or any Jamo product.

The actual universal (and one-for-all) remotes are available, but there aren't any preset codes for this brand or model unit.

You need the jamo RC46. Here are two places to get it.
http://www.garrett-smarthome.com/proddetail.php?prod=RC46
http://www.shoponair.com/Products/Home_Entertainment/Dedicated_Remote_Controls?AspxAutoDetectCookieSupport=1
Hope this helps!

i have a jamo dmr61 some times the remote works sometimes not

these guys just want our money

The dvd mech assy is defective and needs to be replaced.

the remote supplied do not do it.you will need the remote for dmr61 that is updated with the function.i can supply you one brand new for £12 including delivery.i can send you the picture so that you can see the difference yourself.

I have the same problem. I have been in contact with Jamo Denmakr and Norway. They are aware of the problem. There are two issues/answers:
1 If the DVD your're playing has scratches reading error accumulate and then audio sync problems occur. (My meaning is lo quality DVD drive). You might overcome this by reburning the divx file to a new disc to avoid read errors.
2 The DVD drive itself is defective and should be replaced. Warranty should cover this of course. I do receive my DMR-61 this week after DVD drive change. I hope this will fix it...but I don't believe so. Crossing my fingers.

Henning

I think we're on about the same model here. I found that holding down the "Source" button whilst switching on the power at the mains would temperorly solve this issue. However, it would be nice to switch it on normally.