Question about Eiki LC-SB20 Projector Multimedia Projector

1 Answer

Won't power up

Hi there! ihave a problem wit our Eiki LC-SB20 Projector. it won't power up, when i press the power on button on remote control and power button on projector the power led lit (green) and suddenly blinking (red) then the unit is turning off. I really appriciate your help.... thanks and GOD BLESS!

Posted by Gabs Villanueva on

  • Gabs Villanueva Aug 01, 2007

    sir Benimur thanks for the prompt solution and also for the link on manual...

    i followed the steps on manual but still the unit is always "cooled down" it means there is something wrong with the unit.. can i ask favor to every one here if you have an idea please help me.

    my place is far from the city i need to travel 3.5 hrs before i bring it to the service personel.
    thanks in advance to every one..

  • Anonymous May 05, 2008

    hello,,,, i have lc-sb20 projector ,when i plug in power cord after few second blinking the red light stil red & not comming the green, please help me



1 Answer

Louie Role

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi, The owners manual says that if the red light is flashing, it is an indicator that it is ready to be turned on (use remote or onboard on button); flashing red & green - too high temperature inside, the unit is overheated. Check and clean the air filters; If the red light is steady, abnormal condition and you have to call for service. A copy of your manual is available at Hope this be of some help. Pls post again how things turn up. good luck and kind regards.

Posted on Jul 31, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


1.leaking polarised glass parts in the blue channel.
2. worst case a leaking lcd panel, impossible and very expensive to replace, you will need a complete optical block

May 29, 2012 | Eiki LC-SB20 Projector Multimedia...

1 Answer

Projector is not project data from laptop

Try to lower the output resolution of your laptop for external display to

800 x 600, which is the native resolution for your SB20

Mar 29, 2011 | Eiki LC-SB20 Projector Multimedia...

1 Answer

My projector want turn off. New batteries in remote.

you have to press the red button twice !! on screen you should see POWER OFF ? after first press, press once again to confirm.
Check if key and remote lock are both off.

Dec 19, 2010 | Eiki LC-XG110 Multimedia Projector

1 Answer

Everything works fine, just going dark on me!

Yes, anytime the picture becomes dim, or the color begins to fade it is time to replace the lamp.

Mar 17, 2010 | Eiki LC-SB20 Projector Multimedia...

1 Answer


turn your contrast down to only 50% and same with your brightness.

Feb 07, 2010 | Eiki LC-SB20 Projector Multimedia...

1 Answer

The projector lock button has locked me out

this can only be solved with remote control or connect the AC cord while pressing the SELECT button on top.
this will cancel the control lock

Mar 06, 2009 | Eiki LC-SB20 Projector Multimedia...

1 Answer

Eiki LCSB Projector: no input

make sure the resolution matches the input.

Sep 14, 2008 | Eiki LC-SB20 Projector Multimedia...

1 Answer

Black and white projection

Hi there

First try another cable from the PC to the Projector.

The VGA / RGB Cable used from your PC to the Projector has a couple of very thin copper wires on the inside and they easily get damaged.

If this doesn't help then you should try another PC.

If that works then you'll know that it is the PC's card that is faulty.

If it doesn't work you'll have to get the Mainboard repaired or replaced , because the inputs on the Projector lies within the Mainboard.

Must warn you that a Mainboard replacement is a bit on the expensive side.

Mar 26, 2008 | Eiki LC-SB20 Projector Multimedia...

1 Answer

Its not the lc-sb20 but the lc-nb3e

Hi there

This sounds like a common Ballast ( lamp's power supply ) problem.

Only way to rectify this is by replacing the faulty Ballast.

Sep 08, 2007 | Eiki LC-SB20 Projector Multimedia...

1 Answer

Cooled down

Hello again gabzky, My apologies for getting back to you a bit late. I understand that you followed the manual but was not able to resolve your problem. There is something else you can try, hard reset the unit. At the back of your LC-SB20 Projector between DVI-I and Service port, above and to the left of the computer/component in is a small reset button. You may need to use a ballpen to depress the button. You have to press this with the power on. Cheers and keeping my fingers crossed for you.

Aug 01, 2007 | Eiki LC-SB20 Projector Multimedia...

Not finding what you are looking for?
Eiki LC-SB20 Projector Multimedia Projector Logo


Ask a Question

Usually answered in minutes!

Top Eiki Office Equipment & Supplies Experts

Richard C Cohen
Richard C Cohen

Level 2 Expert

171 Answers


Level 3 Expert

1650 Answers

Tom Chichester

Level 3 Expert

61659 Answers

Are you an Eiki Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides